Intended Use - aidapt VM917 Usage And Maintenance Instructions

INTRODUCTION
Thank you for deciding to purchase the Tube Squeezer from Aidapt. The Tube
Squeezer is manufactured from the finest materials available. When used correctly
it is designed to give many years of reliable, trouble-free service.
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.

INTENDED USE

The Tube Squeezer makes it easy to put pressure on toothpaste and similar tubes,
squeezing out the contents. The Tube Squeezer is ideal for one-handed use and for
those with arthritis, as well as thrifty or eco-friendly users keen to reduce waste by
ensuring that tubes are completely empty before throwing them out.
Suitable for most products stored in tubes, whether in the bathroom, kitchen or
utility room.
INSTRUCTIONS FOR USE
Ensure that the surface on which you will be positioning the Tube
•
Squeezer is clean and dry.
Position the Tube Squeezer as desired then press down to secure it to the
•
surface with the built-in non-slip suction base.
Slide the 'key' over the end of the tube, then position the key into the base
•
and twist to squeeze the tube.
The suction base is designed to hold the Tube Squeezer in position while
•
the tube is being squeezed with the 'key' using just one hand if necessary.
CLEANING
Clean your Tube Squeezer using a non-abrasive cleaner or mild detergent with a
soft cloth. Abrasive cleaners e.g. AJAX and/ or abrasive cleaning pads may damage
the product beyond repair and should not be used. Always ensure that you rinse
then wipe dry the equipment after cleaning.
Usage and Maintenance Instructions
2
Ver. 2 07/2012 (2160)