Connecting To Optional Equipment - Apex Digital AD-1100W Owner's Manual

Connecting to Optional Equipment

WARNING
Do not set "AUDIO OUTPUT" to "SPDIF/RAW" via the SETUP MENU display, unless connecting (the
PCM/BITSTREAM jack) a receiver that has Dolby Digital/DTS decoding. Take precautions as excessive volume may
damage your speakers as well as your hearing.
Enjoying Dolby Pro Logic Surround
Sound
Dolby Pro Logic Surround
Enjoy the dynamic realistic sound of Dolby Pro
Logic Surround by connecting an amplifier and
speaker system (right and left front speakers, a
center speaker, and one or two rear speakers).
To VIDEO
OUT
Yellow
Connection
Example
To video
input
Front
speaker
(left)
Connect one or
two speakers. The
output sound from
the rear speakers
will be monaural
even if you
Rear
connect two rear
speaker
speakers.
Set "AUDIO OUTPUT" to "ANALOG" via the
setup menu.
!
• Refer to the manual of the connected audio receiver.
• Turn off power and unplug both units before connecting.
• Due to the wide dynamic range of sound output of the DVD video player, adjust the volume of your receiver to a comfortable
listening level to avoid speaker damage.
A P E X D I
12
To ANALOG
AUDIO OUT 2
Audio cable
To audio
Amplifier
input
equipped with
Dolby Pro
Logic Surround
Front
speaker
TV
(right)
Center
speaker
G I T A L
Enjoying Digital Stereo Sound
Digital Stereo
Enjoy the dynamic sound of Digital Stereo by
connecting an amplifier equipped with a digital
audio input and speaker system (right and left
front speakers).
To VIDEO
OUT
Yellow
Connection
Example
To video
Front
speaker
(left)
TV
Set "AUDIO OUTPUT" to "SPDIF/PCM" via the
setup menu.
To PCM/BITSTREAM
Coaxial cable
(Optional)
To digital
audio input
Amplifier equipped
with digital audio input
input
Front
speaker
(right)
AD - 1100w