Care And Maintenance - Russell Hobbs RH3VTD800 Instruction Manual

Care and maintenance

Cleaning the Lint Filter
Note:
• ALWAYS CLEAN THE FILTER AFTER EACH USE. Failure to do so could
cause the safety cut-out to operate.
• The lint filter must be in place whenever drying.
• Unplug the power cord prior to any cleaning.
1. Open the appliance door and remove the filter that is inside at the
rear of the drum.
2. Remove the filter from the rear of the drum by pulling the filter
outwards with your fingers inserted into the four holes around the
exhaust vent shroud. The filter has 3 parts: Exhaust vent shroud, lint
filter and exhaust filter. Pull the filter out of the appliance.
22