Table of Contents
Advertisement
1)
ALWAYS drain excess paint from cup or pot before placing
in gun washer.
2)
Drain paint sludge from gun washer tank weekly. Do this
after a weekend so that it has settled. Open ball valve
and drain until clear solution flows. Add cleaning solution
to fill 1" above intake filter.
3)
Replace Filter/Regulator yearly. (#11345)
4)
Change cleaning solution completely when objects being
cleaned become tacky to the touch.
5)
Clean inside of tub and intake filter before filling with
cleaning solution.
Do not change the setting of the filter/regulator.This could
damage the filter/regulator or pump
Preventative Maintenance
To keep your machine working efficiently, please follow these directions.
CAUTION
Page 12 of 20
Filter /
Regulator
(#11345)
fig.5
Advertisement
Table of Contents
