Assembly Instructions - Henry Schein 112-7157 Quick Start Manual

Assembly Instructions

Step 1. Carefully remove the scale platform and pillar from the carton. Place the scale platform
and pillar on a flat service. Using a table top can be helpful for assembly of the scale.
Step 2. Remove the four pillar nuts and wrench from the carton
Step 3. Locate the steel rod at the base of the pillar
Step 4. Cut the tie wraps that holds the steel rod to the pillar studs
Step 5. Insert the studs into the four holes provided in the scale platform
Step 6. Tip the scale platform at an angle, resting the top of the pillar on a stable support.
Step 7. Using the wrench provided, secure the pillar to the scale platform with the four nuts
Step 8. Pull the steel rod toward the base of the scale platform by grasping the finger pull loop
on the steel rod end.
Step 9. Push the lever extension in the base toward the pillar with your hand
5