Battery; Maintenance; Transport; Using The Scooter - URBANGLIDE RIDE 81 BOOST Translation Of The Original Instructions

Hide thumbs Also See for RIDE 81 BOOST:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

• Battery

Please do not store the battery in extreme temperatures. Store it below 30 ° C and
above 0 ° C. If you do not use your product for 60-90 days, the battery may get worse.
This loss of autonomy is due to lack of use and is therefore not covered by the warranty.
At the end of its cycle, the battery must be discarded separately from the
undifferentiated generic waste. Discard the batteries in the containers provided for this
purpose. The recovery and recycling of batteries contributes to protect the environment
and material resources conservation.

• Maintenance

Please store your product in a dry, dust-free place, and avoid leaving it in a humid area
or under the sun for too long. To clean your appliance, use a damp cloth and mild
detergent. Do not use alcohol, gasoline, kerosene, or other corrosive chemical solvents
to clean your appliance, which will damage its appearance and structure.
Constantly verify the condition of components of your product, if any part is damaged,
please replace it before using the product. If a part is not working, falling and injuring
may occur. Do not disassemble the scooter in case of breakdown, otherwise the
warranty will cancel. Before any intervention, it is advisable to turn off your scooter. For
all spare parts, please contact your dealer

• Transport

If you wish to transport your product by air or other means of transport as well as its
battery, please contact the local authorities and the carrier beforehand to obtain the
possible prohibitions and limits of transport. Lithium batteries are considered
dangerous in many countries. Please make sure that the access and transport are
allowed before travelling. International law prohibits the transport of lithium batteries
by air.

• Using the scooter

To turn on your product, press the Power button, then press the accelerator to
advance. To move forward, place both feet on the board, and use the right trigger on
your handlebars to advance your scooter. To brake, you can use the left trigger on
your handlebar, or press the rear fender with your foot to reduce the speed of your
scooter. Before each use, please check that the wheels are not clogged, that the
brakes are working and that no warning message is displayed. Using the scooter for
long periods can cause vibrations that can be unpleasant, make poses regularly. When
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents