Advertisement
Emptying your bin
Empty your bin as soon as the dirt reaches the MAX mark.
You may need to clean the filter more often if you use your
machine with a full bin.
Remove your wand
Press the red wand release button, on the top of the wand,
and pull the wand away from the bin.
Release the dirt
Hold your vacuum over a bin.
Push the red bin release button, taking care not to press the power button.
The bottom of the bin will open and the shroud will slide down inside the bin,
wiping away any dirt.
If the bin doesn't open, check the bin release button is pushed down fully.
To remove the bin for emptying:
If the bin doesn't empty fully, remove the bin and empty the dirt.
Press the red button located on the bin runner to release the bin and slide
your bin off the runner.
Minimise dust contact
Cover your bin tightly in a dust proof bag while you empty. Remove the bin
carefully, seal the bag tightly and dispose.
Reassemble your machine
If you have removed your bin, slide it back on to the runner. Make sure that
the bin and lid are both securely in position.
Push the bin base upwards until the bin and lid both click into place.
Reconnect the wand.
Cleaning your bin
Don't put any part of your machine in a dishwasher or use detergents,
polishes or air fresheners.
Clean your bin
If it is necessary to clean your bin, empty it as shown in the 'Emptying your
bin' section.
Press the red button located on the bin runner to release the bin and slide
your bin off the runner.
Only clean your bin with a damp cloth.
Make sure that the bin and seals are completely dry before replacing.
Replace your bin
Insert the spine on to the bin runner.
Close your bin by pushing the bin base upwards until the bin and bin base
click into place.
The MAX mark on the bin of the machine,
showing that the dirt should not be filled
over the Max mark when the machine is at
the angle of normal use.
Illustration of the bin
being emptied into
a bag with images
demonstrating to take
care not to press the
trigger when emptying
the bin.
Two images of the bin
with arrows showing
the bin lid closing and
a click symbol and
the bin being pushed
upwards with another
click symbol.
The bin being removed and the location of the bin
release lever on the underside of the bin runner.
The bin being pushed
back into position on
the bin runner.
Advertisement
