Charging; Power On/Off And Headphone Connection Waiting Mode - Phiaton 900 LEGACY Owner's Manual

3. CHARGING

The device may have low battery and should be charged before first use.
1) Connect the provided USB charging cable to 900 LEGACY.
2) Connect the provided USB charging cable with a computer (laptop) or you may also use an USB adaptor
(purchased separately) with a minimum rating of 5V (over 500mA).
USB Charging cable

4. POWER ON/OFF AND HEADPHONE CONNECTION WAITING MODE

Power ON/OFF
ON: 2 Seconds
OFF: 2.5 Seconds
Status Operation
Press and hold the POWER
ON
Button for 2 seconds
Press and hold the POWER
OFF
Button for 2.5 seconds
※ When powering on for the first time after purchase, pairing mode is automatically activated.
2) Connection Waiting Mode
- When power is turned on, 'Connection Waiting Mode' will start if 'Pairing Mode' cannot be entered
or the headphones cannot connect with 'Bluetooth Device'.
- If the 'Bluetooth Device' is not connected within 5 minutes in 'Connection Waiting Mode',
the headphones will automatically turn off.
※ At Connection Waiting Mode, the headphone should be entered to 'Pairing Mode' for connection to
'Bluetooth device' again after power off. If not, 900 LEGACY will turn off within 5 minutes after starting
'Connection Waiting Mode'.
Status
Connection Waiting Mode
5
Operation LED indicator
Charging Red Light
Charging complete Blue Light
- This device has a built-in battery, and will begin charging
automatically when you connect the charging cable.
1) Power ON/OFF
- Press and hold the 'Power' Button for 2 seconds to turn the power on.
- When turning the power off, press and hold the POWER Button for 2.5
seconds to turn off.
LED Indicator
After Purple light,
Blue light blinks 2 times
Red light blinks 5 times
LED Indicator
Blue light blinks twice in 6 second intervals
Notice
Sound effect
Sound effect