Proper System Handling; Overview - Brainlab KICK 2 System And Technical User Manual

Proper System Handling

3.2 Proper System Handling
3.2.1

Overview

Proper Handling
Warning
Prior to surgery, perform a functional test. Ensure that system boots correctly and patient
data is correctly loaded in the relevant navigation application and communication to the
tracking device is available.
Do not sit or stand on the cart. Do not lean against the cart as it creates a tilting hazard.
Patient Safety
System components should never come into direct physical contact with the patient.
Modification
Do not make any modifications to the Kick 2. Only Brainlab certified personnel may make
modifications.
Warning
Only use the system components as delivered by Brainlab. Do not modify the system in
any way. Altering the system or using it outside of its intended use may result in severe
harm to the patient, user or third party.
Risk of Electrical Shock
To prevent electrical shock or permanent system damage, do not expose the Kick 2 to excessive
moisture.
Warning
Never touch the patient and any system parts or electrical interfaces at the same time, due
to possible electrostatic discharge.
Warning
Only connect the Kick 2 to a mains power supply with protective earth. Failure to do so
may result in personal injury.
Do not touch the electrical contacts of plugs.
Appropriate Positioning
To avoid damage to the Kick 2, other equipment or people, always move, park and operate in the
respective appropriate position.
The Kick 2 may only be used on level surfaces.
Fully brake the Monitor Cart during operation.
Do not place Kick 2 or any parts thereof over the patient.
Radio Interference
Warning
This equipment is intended for use by health care professionals only. It may cause radio
interference or may disrupt the operation of other nearby equipment. It may be necessary
30 System and Technical User Guide Rev. 1.3 Kick 2 Navigation Station