Y
Tools Required:
Flat Screw Driver
Materials Identification and Segregation:
Where possible, plastic components are marked with ASTM recycling codes. Use
these codes to identify material type for recycling. Non marked components should
be treated as mixed plastic. Ferrous metals can be identified using a small magnet
for recycling. Non-ferrous metals should be separated and recycled separately.
Steps:
1. Pull the drawer and
remove from the slider.
2. Repeat step 1 to remove
rest of the drawers.
Z
© 2011 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Meridian are among the registered trademarks of Herman Miller, Inc.
Sense, Setu, and Tu are among the trademarks of Herman Miller, Inc.
TM
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Safety Glasses
Meridian
Rachet Wrench
3. Disengage the slider and
remove.
4. Repeat step 3 to remove
rest of the sliders.
Disassembly for Recycling
®
Part no. 1b9thw rev A.
1
Need help?
Do you have a question about the Meridian and is the answer not in the manual?
Questions and answers