AMX VST Instruction Manual page 13

Programming Quick Reference (Cont.)
Command
EQUIPCONFIG
BLREADY
BLTRIG
BLTON
ENTR
SCUP
SCDN
ViewStat Communicating Thermostat - Programming Protocol Reference Guide
Description
Auxiliary Information Commands
Reports the setting of the thermostat configu-
ration DIP switches
Reports ready state of photosensor
Sets relative room light intensity level required
to put backlight in ready state
Turns on backlighting, regardless of ready
state, for 10 seconds.
Enter button status
Scroll Up button status
Scroll Down button status
ViewStat Programming Protocol
Value
Read Only
0 = Backlight in ready state,
1 = Backlight not in ready state.
0 = darker,
1=lighter
No value required for this command
1 = State change from inactive to active,
0 = State change from active to inactive
1 = State change from inactive to active,
0 = State change from active to inactive
1 = State change from inactive to active,
0 = State change from active to inactive
9