Advertisement
4
Add KLIK to A Wireless Network
First, Connect to KLIK using Wi-Fi
1) Power on the KLIK Boks and con rm that the Standby screen is shown on the
presentation display:
This is the Wi-Fi signal name
being broadcast by KLIK. Connect
to this SSID as shown below.
2) Open your computer's Wireless Network connection manager and select the
KLIK Boks by name. Press Connect. No password is required.
Windows
NOTE: Connect to KLIK as if you are connecting to a Wi-Fi network.
Page 2
Ready for Connection
This is the Device ID, the default
name of the KLIK Boks. It can be
changed during Setup.
Mac
4
Add KLIK to A Wireless Network
3) Open a browser window
and navigate to the KLIK Boks
IP address shown in the
Standby screen (default is
192.168.59.254).
Enter
the
password (Default is admin)
and click Sign In.:
4) Select Wireless Settings
from the menu on the left,
then click on the Wi-Fi Connec-
tion tab to navigate to the
Wi-Fi pairing screen.
NOTE: If you change the Device Name at this stage, you must reconnect using the
new name as in section 4b in order to continue setup.
5) Click on the "Scan for Wi-Fi"
button to search for the
wireless access point that KLIK
will be connected with . This
could take up to 2 minutes to
complete. Select the preferred
wireless Access Point (AP)
from the list.
6) Enter the password for your
selected Wi-Fi Access Point
and click Submit. The KLIK
Boks will terminate broadcast-
ing its SSID and will connect
to the Wi-Fi network. Any
connected devices will be
disconnected.
Copyright 2018 KLIK Communications Inc. - All Rights Reserved www.klikboks.com - Document QSG8.1.0
Page 3
Advertisement
