Quick stops, excessive force, electrodes, and requirements for the grounding and uneven surfaces may cause the product and electrode. cart combination to overturn. KB1200 – KLIK Boks HUB Page 2 of 39 Owner’s Manual Version 1.2...
Page 3
WITHIN into the product. EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT If the product has been exposed to rain or water. KB1200 – KLIK Boks HUB Page 3 of 39 Owner’s Manual Version 1.2...
Page 4
Increase the separation between the equipment The device for operation in the band 5150- and receiver. 5250 MHz is only for indoor use to reduce the KB1200 – KLIK Boks HUB Page 4 of 39 Owner’s Manual Version 1.2...
Page 5
20 cm or more should be vicinity. For more information about collection and maintained between the antenna of this device and recycling of waste batteries, please contact your KB1200 – KLIK Boks HUB Page 5 of 39 Owner’s Manual Version 1.2...
Page 6
KB1200 – KLIK Boks HUB Page 6 of 39 Owner’s Manual Version 1.2...
Live-stream content, in real time, to YouTube private or public channels, or 2) W ’ S IN THE record locally ▪ KB1200 Wireless Presentation System ▪ Handheld Infrared Remote Control KB1200 – KLIK Boks HUB Page 11 of 39 Owner’s Manual Version 1.2...
Recessed mounting tabs aid in wall mounting. KB1200 is equipped with a “Kensington-style” lock perforation on the right side of the enclosure. KB1200 – KLIK Boks HUB Page 12 of 39 Owner’s Manual Version 1.2...
OWER TARTUP The KB1200 starts automatically when power is applied. On first start, the KB1200 will attempt to connect to the cloud server for authentication. If a KB1200 – KLIK Boks HUB Page 13 of 39 Owner’s Manual Version 1.2...
DHCP server. To manually set the IP ONNECTING TO A ISPLAY address or make other Ethernet network changes, see ▪ Ensure that the KB1200 power adapter is disconnected and the Video display is KB1200 – KLIK Boks HUB Page 14 of 39 Owner’s Manual Version 1.2...
The Display panel contains information about the configuration of the KB1200. • Device Name – This is the friendly name assigned to the device and is used to locate KB1200 – KLIK Boks HUB Page 15 of 39 Owner’s Manual Version 1.2...
Most controls in the Settings menu may be left with their default settings. Follow the instructions below to modify recommended settings. ▪ Select Advanced Options to change Proxy and DHCP settings. KB1200 – KLIK Boks HUB Page 16 of 39 Owner’s Manual Version 1.2...
To set a static IP address, click on Advanced Configuration and de-select the DHCP switch. ▪ Enter the IP address, Network Prefix Length, Gateway address and DNS1&2 Server addresses. Click OK to save settings. KB1200 – KLIK Boks HUB Page 17 of 39 Owner’s Manual Version 1.2...
Turn off automatic date & time by clicking on the switch near the top-right corner. ▪ Navigate to Settings>Display>TV System. ▪ Select Date, Time, Time Zone and Format. KB1200 – KLIK Boks HUB Page 18 of 39 Owner’s Manual Version 1.2...
Themes, which can be set and recalled from the Settings Panel. On power-up, the KB1200 loads the KLIK Default Theme. Additional themes may be created and any theme may be designated as the default to load when the KB1200 starts.
Page 20
Type a name for the new theme and press enter. The image file will be loaded and immediately displayed in the thumbnail window, the desktop simulation and the Standby screen. KB1200 – KLIK Boks HUB Page 20 of 39 Owner’s Manual Version 1.2...
The KB1200 displays a message on the Standby screen “bumping” existing users off the system. that advises users about which network they need to be connected to, in order to access the device. KB1200 – KLIK Boks HUB Page 21 of 39 Owner’s Manual Version 1.2...
Click Apply to save the settings changes. DMIN ASSWORD Access to both Android and KLIK menus is restricted by means of an Administration Password. The Admin Password is enabled by default. The default password is 1234. By default, this message will display the Hotspot SSID, if the Hotspot is enabled.
Page 23
Tap or click Pairing to KLIK K AIRING continue. The KB1200 is compatible with the KB400 (KLIK Knkt HDMI Sender) accessory device. The KB400 connect to any HDMI-equipped video source device, such as a PC, Document Camera, Blu-ray Player, and allows that device to stream to the KB1200 wirelessly.
The resolution setting determines the pixel density of the streamed image. Credentials may be entered manually or imported electronically. Select the desired stream resolution from the supported modes. KB1200 – KLIK Boks HUB Page 24 of 39 Owner’s Manual Version 1.2...
Select the Record tab to reveal the settings panel that configures the Recording feature. ESOLUTION Select the resolution at which the content will be recorded. KB1200 – KLIK Boks HUB Page 25 of 39 Owner’s Manual Version 1.2...
Lower bit rates conserve storage space. • Click on the bit rate display field to select a setting from the available modes. Click Apply to save the settings changes. KB1200 – KLIK Boks HUB Page 26 of 39 Owner’s Manual Version 1.2...
In addition, a URL is provided for users to obtain EVICE information and assistance with the KLIK device. The device name is displayed on the Standby screen. Users will look for this name to start a screen sharing session when using the KLIKConnect application on their device.
As a convenience, all current screen mouse. The feature is active when sharing streams may be terminated the dual-mouse icon is displayed. at one time. End all client streams in KB1200 – KLIK Boks HUB Page 28 of 39 Owner’s Manual Version 1.2...
When all users exit the screen share, the display returns to the Standby screen. A second screen share causes the screen to split into two panes, displaying both screens, side by side. KB1200 – KLIK Boks HUB Page 29 of 39 Owner’s Manual Version 1.2...
When screen sharing is active, the Standby screen is not displayed. As a consequence, those arriving after screen sharing has started, cannot see the device name and password to join the session. KB1200 – KLIK Boks HUB Page 30 of 39 Owner’s Manual Version 1.2...
The on-screen password is contained in a rectangular graphic that may be moved across the top of the display screen for better visibility as needed. KB1200 – KLIK Boks HUB Page 31 of 39 Owner’s Manual Version 1.2...
When the Play button is revealed, tap or click on it to push the content to the screen. KB1200 – KLIK Boks HUB Page 32 of 39 Owner’s Manual Version 1.2...
• Select the font size with the slider. • Select the Font from the drop-down. • Select Fill or Outline, Bold & Italic. KB1200 – KLIK Boks HUB Page 34 of 39 Owner’s Manual Version 1.2...
Tap or click on the Redo (right) icon to go forward one step. & N AVIGATE AGES KB1200 supports the creation and display of multiple annotation pages that may be displayed one at a time. KB1200 – KLIK Boks HUB Page 35 of 39 Owner’s Manual Version 1.2...
These settings must be configured before the Live Streaming feature ECORDING ETTINGS can be used for the first time. KB1200 – KLIK Boks HUB Page 36 of 39 Owner’s Manual Version 1.2...
The IP Address is the network address assigned to the KB1200. This address is used by all network devices to communicate with one another. The IP address is shown on the Standby screen UMBER KB1200 – KLIK Boks HUB Page 37 of 39 Owner’s Manual Version 1.2...
When enabled, the Hotspot SSID (name) is displayed on the KB1200 standby screen, under the “Wi-Fi Connection” label. Users will select this SSID from the Wi-Fi settings panel on their device. KB1200 – KLIK Boks HUB Page 38 of 39 Owner’s Manual Version 1.2...