Stoane Lighting Iris Type S Installation And Maintenance Instructions

Iris S.pdf 1 19/01/2021 14:37:21

All of our in-house printed paper

is 100% recycled and recyclable

IMPORTANT: All wiring connections must be made before switching on mains power.

SL Type S 2.85V

1.4W @ 500mA

This product should not be disposed of in your general waste

Please retain these instructions for future reference

Stoane Lighting Ltd

20 Dryden Road Bilston Glen Ind Est.

Loanhead Midlothian EH20 9LZ UK

Iris Type S

Installation and Maintenance

Instructions

Class III - Extra Low Voltage

IP65 Dust tight and protected against low power jets of water.

European Conformity

T: +44 (0) 131 440 1313

F: +44 (0) 131 440 0049

sales@mikestoanelighting.com

www.stoanelighting.com

VAT No GB682885284

Limited Company 188910

Table of Contents

Need help?

Do you have a question about the Iris Type S and is the answer not in the manual?

Page 1 Iris S.pdf 1 19/01/2021 14:37:21 All of our in-house printed paper is 100% recycled and recyclable Iris Type S Installation and Maintenance Instructions IMPORTANT: All wiring connections must be made before switching on mains power. SL Type S 2.85V 1.4W @ 500mA Class III - Extra Low Voltage IP65 Dust tight and protected against low power jets of water.
Page 2: Electrical Supply
All Stoane Lighting products are covered by a five year light quality. Warranty and a 25 year Duty of Care. Products are...
Page 3 Iris S.pdf 3 19/01/2021 14:37:21 33mm cut out Min 4mm Max 17mm Retaining Wings Connect to fittings Min 1mm Connect to Mains Max 9mm...
Page 4: Tilt Adjustment
Iris S.pdf 4 19/01/2021 14:37:21 LENS / SNOOT CHANGE Fully isolate and allow fitting to cool sufficiently before handling. Step 1 Lock the fitting at a non-tilted position and use the specialist tool provided to unwind the ring anti-clockwise to remove it from the tube. Step 2 The lens and or snoot can now be removed from the fitting and replaced with one of suitable specification.
Page 5 All Stoane Lighting products are supplied with a 5 year warranty and a 25 year duty of care. Stoane Lighting operate a ReNew division, which can take your existing fittings and refurbish or upgrade without the need for replacing what you already have.