AMX TP4-RGB Schematic Diagram

TP4-RGB
VGA / RGB
NOTICE: This drawing is the UNLESS OTHERWISE SPECIFIED:
property of AMX Corporation. DRAWN
TOLERANCE ON DECIMAL DIMENSIONS: XX = .010
All information contained herein
XXX = .005
ENGR SERV
that is not generally known
TOLERANCE ON HOLE DIAMETERS:
ENGINEER
shall be confidential except UNDER .250 ú = +/- .005
.250 TO .500 = +.006 -.005
to the extent the information
PROD ENGR
OVER .500 = +.008 -.005
has been previously established.
FRACTIONAL DIMENSIONS INCLUDING HOLES: +/- 1/64
MATL SUP
ANGLES: +/- 1.0°
This drawing may not be copied,
SURFACE FLATNESS .003 TIR PER LINEAR INCH.
QUALITY
reproduced, or used as the basis
ALL DIMENSIONS IN INCHES.
for manufacture or sale without
DO NOT SCALE THIS DRAWING.
written permission.
REVISIONS
REV ECN DESCRIPTION DATE
A 4208 RELEASE TO PRODUCTION 09-27-02
REL APPR REL DATE REV APPR
J.L. 09-19-02
TM
MAB 09-26-02 MAB
PICTORIAL
TC 09-27-02 TC
TP4-RGB, TPI/4 RGB AND VGA INPUT CARD
AVT
AVT 09-27-02
AM
AM 09-27-02
AK 09-27-02 AK SIZE SCALE: DWG. NO.
FULL 95-2275-20
D
THIRD ANGLE
PROJECTION
95-2275-20 SHEET
APPROVED
REV.
A
1 OF 1