Advertisement
40
ngs
ystem PIN is used when
changing certain settings and
registration / deregistration.
The default setting is 0000.
You can change this to your
own preferred 4-digit number.
If you make a mistake, press
to delete.
Clear
tension number of
six digits or fewer, or a local
number without the dialling
code, is entered in your
contacts, then an access code
and Pause will prefix the
number when it's dialled out.
system PIN
Press Menu and scroll to
2. Scroll
Base and press OK.
3. Scroll
Change System PIN and press OK.
4. Enter the old 4 digit PIN (default=0000) and press OK.
5. Enter the new 4 digit PIN and press OK.
6. Enter the new 4 digit PIN again and press OK.
Saved will be shown.
to enter an access code (e.g. 9) before each number
is dialled. Your BT Aura 1500 can store an access code
which is automatically dialled before each number.
ting the PBX access code
Press Menu, scroll to
2. Scroll
Base and press OK.
3. Scroll
PBX Access. Press OK.
4. Enter the number you want (single digit only) and
press OK.
Saved will be shown.
0800 218 2182* or go to www.bt.com/producthelp
OK.
OK.
Advertisement
