Table of Contents
Advertisement
ARTEMIS
English
6. Settings
When the BiDiB system is switched on, all nodes on an interface are
automatically recognised. If the control software supports this, new nodes
that have not yet been configured are displayed when the system is
switched on and can then be configured directly.
6.1. Identify button
To identify an ARTEMIS bus bridge in the screen display of the control
software, press the Identify button on the board. The associated BiDiB
node is then highlighted on the screen and the LED on the hub flashes.
6.2. Firmware-Update
With the programs BiDiB Wizard and BiDiB Monitor (both available as
free download) you can carry out a firmware update and configure the
hub. Please refer to the description of the respective program to see
whether other programs also offer these possibilities.
The latest firmware is available as a free download at:
http://tams-online.de/download/firmware
Page 15
Advertisement
Table of Contents
