Connection Of The Power Supply - tams elektronik ARTEMIS Manual

English

5.2. Connection of the power supply

Use a separate plug-in or switching power supply for ARTEMIS.
Technical data:

Output voltage: 12 - 18 V direct voltage (DC)

Output current: at least 1 A
Please note :
!
Do not use an AC transformer or AC power supply unit as the power
supply. ARTEMIS would be damaged (possibly irreparably) during
commissioning!
Never connect digital components which are integrated in a conventional
digital controller (with digital central unit) to a power supply unit which is
used to supply BiDiB components.
Page 12
Use the supplied terminal
block to connect the power
supply. Connect the terminal
to the "Power" connector so
that the screws are visible
from above.
Insert the power supply
connection cables into the
terminal and screw them
tight. Observe the polarity. If
the polarity is incorrect, the
unit will not function.
ARTEMIS