AMX RDA-ENC4 User Manual page 11

AMX Lighting - Enclosure Worksheet Guide
• blank
• RDD-DM4/120
• RDD-DM4/240
• RDD-DM4/277
• RDD-DM6/120
• RDD-DM6/240
• RDD-DM6/277
• RDM-INC
• RDM-2INC
• RDM-INC50
MODULE Switches (right) uses a drop-down menu containing the switching choices listed
below:
• blank
• RDM-MDM
• RDM-SWM
• RDM-2SWM
• RDM-3SWM
• RDM-HSW
• RDM-2HSW
• RDM-3HSW
AXlink Device #: Enter the chosen or assumed AXlink device number. This is a text cell
with a default Device value of 96 and should be a three-character number from either 1 - 255.
If the device number is unknown then the field can be left blank. It is advisable to start device
number for AMX Lighting at Device # 96, whether it is the actual number used in the
program. A unique number entered here can flag the programmer to use a unique device
number in the Axcess program. There can be up to three AXlink devices on this sheet and the
PROlink can use the same AXlink device number and sequence its pack numbers. The DIP
switches in the middle section should reflect the number chosen in this cell. AXlink
# uses a text field that allows three characters:
-Text field-
AMX Lighting - Enclosure Worksheet Guide
• RDM-MDM
• RDM-FDB
• RDM-2FDB
• RDM-3FDB
• RDM-HFDB
• RDM-DC
• RDM-2DC
• RDM-3DC
• RDM-HDC
• RDM-DPSM
• RDM-ZC
• RDM-2ZC
• RDM-ZC50
• RDA-EFP
• RDA-PSM
DEVICE
5