CompuSTAR Slice 2W940R-SS Quick Start Card

QUICK START CARD
A tap of this button will lock the doors on your Compustar remote starter.
A tap of this button will unlock the doors on your Compustar remote starter.
Holding this button for 2.5 seconds will pop your trunk, if equipped. If not, ask your
Compustar Dealer for details on how to get it.
Holding this button for 2.5 seconds will start your vehicle. Slice will blink the Start icon and
other LEDs showing the remote start run time.
Register online at www.compustar.com within 10 days of purchase to activate your new Slice remote's
warranty.
To reprogram your remote first cycle the key in the ignition 5 times within 7 seconds. Parking lights will
flash. After that tap the Lock button on your remote. Repeat for any additional remotes. If you receive
two parking light flashes, your Compustar has exited remote programming mode and you must retry.
Questions/comments? Contact us at 888-820-3690 from 8 AM to 5 PM PST. Also please visit www.
compustar.com for a complete user's manual.
Tapping these two buttons at the same time will turn Valet Mode on or off on your
system. Holding them for 2.5 seconds will turn the Shock Sensor on or off.
Tapping these two buttons will mute and unmute the factory horn on your
Compustar remote starter.
2W940R-SS