Key Features; Electrical Specifications - Spectro-UV Spectroline uVision Series Manual

KEY FEATURES

• Nominal steady state intensity of 6,000 µW/cm
• Large 6.4-inch diameter coverage area at 15 inches (38cm) with a minimum
UV-A intensity of 1,200 µW/cm
• Less than 1.0 foot-candle (11 lux) emission.
• Long-lasting UV-A lenses.
• Cool running, fanless design.
• Lightweight and rugged construction.
• White Light, LED Inspection Light.
• IP65 Rated: The
and from low pressure jets of water (from all directions). For more details, consult
EN 60529 (British BS EN 60529:1992, European IEC 60509:1989).
• Certificate of Conformance (ASTM E3022-15) included.
TECHNICAL SPECIFICATIONS
uVision™ Series
UV-365HC
Height
Length
Width
Weight
Light Source

ELECTRICAL SPECIFICATIONS

Input: 100-240V AC, 0.9, 50-60 Hz
Output: 15V DC, 2.4A
POWER CORD SPECIFICATIONS
LAMP PART NUMBER
UV-365HC
UV-365HC/F
UV-365HC/FA
UV-365HC/FB
UV-365HC/FBR
*Each lamp is fitted with an 8-foot cord and the appropriate plug for the country of destination. An
optional 20-foot cord is available. The "/20" suffix denotes the 20-foot power cord options.
*See next page for detailed power cord information.
UV-365HC Technical Details
(ASTM E3022-15).
2
Series lamps are protected from total dust ingress
uVision™
at 15 inches (38cm).
2
UV-A (365nm) and white light
7.5 inches
4.25 inches
3.75 inches
4.29lb. (1,946 g) with power supply;
1.94 lb. (880 g) without power supply.
3 UV-A LEDs, 1 white light LED
POWER REQUIREMENTS*
120V/50–60Hz
230V/50Hz
240V/50Hz
230V/50Hz
220-240V/50-60Hz
5