Samsung SF-5100 Technical Document page 7

Toner cartridges

Hide thumbs Also See for SF-5100:

Summit Laser Products - Samsung SF-5100 Toner Cartridges

FIGURE 20

21. Clean the conductive grease off the left side (Non Gear) end cap and replace with fresh grease.

Replace the end cap and three screws. See Figure 22

22. Install the PCR. See Figure 23

FIGURE 22

23. Install the right side end cap and screws. Make sure the PCR fits correctly in its holder, and all the

gears are aligned. The double gear that stayed with the end cap can be installed while on the end cap.

See Figure 24

24. Fill the hopper with 90g of the 5100 toner. See Figure 25

This can also be done through the fill plug, but the fill plug tends to leak and will probably have to be

sealed with silicon. See Figure 28

http://www.summitechnologies.com/docs/0307/0307.asp

FIGURE 21

FIGURE 23

Page 7 of 11

4/21/2008

Table of Contents