LED INSTALLATION GUIDE
SAFETY
• This unit is only suitable for connection to a 12V SELV lighting circuit, or a separate
SELV transformer (Not included).
• Ensure the SELV circuit / Transformer has sufficient capacity to add the unit.
• The unit should be installed in accordance with local regulations.
• If installing a new transformer to power the unit, all guidance relating to the
installation of the transformer must be followed.
• This is for domestic, indoor use only.
• Ensure the power supply is turned off before attempting to connect the unit to the
circuit.
• This product may contain delicate parts – be careful during handling and
maintenance to avoid breakage.
• If any modification is made to the
fitting it will invalidate the warranty
and may render the product unsafe.
• A defective appliance may cause
electric shock. Never switch on a
defective appliance. Unplug the
appliance from the mains or switch
off at the circuit breaker in the fuse
box before seeking assistance.
• The installer must use an electrical
connector suitable for the
application and environment.
BOSTON LED FURNITURE
PRODUCT DIAGRAM
SENSOR
CONTROLLER
WIRE FOR
CONNECTION
LED STRIP
LED STRIP
LED STRIP
COVER
Need help?
Do you have a question about the BOSTON BeBa 17340 and is the answer not in the manual?
Questions and answers