Turning The Unit On; Preparing Espresso - Swann Retro SK22150 Manual

PLACING THE CUP(S)
• Pull out the drip tray bracket if you are using
a small "demitasse" cup to brew espresso.
• Keep the drip tray bracket inside its com-
partment if you are using a larger cup to
brew cappuccino.
• Keep the drip tray bracket inside its com-
partment if you are using a larger cup to
brew latte.
CAUTION: When brewing cappuccino or latte, please make sure to adjust the froth-
ing tube lever in order to position the milk dispensing tube inside the cup to be used.
Additionally, you also can adjust the length of frothed milk dispensing tube by locking
it onto different position of frothing tube lever to adapt to different size of cup. Note:
This tube can be removed for cleaning.

TURNING THE UNIT ON

• Make sure unit is plugged in.
• Turn unit on (switch on right hand side).
• The six control panel lights will start blinking during heating until the water
reaches the perfect temperature.
• Once six lights become solid, the unit is ready to use.
SELECT THE FUNCTION

PREPARING ESPRESSO

• Press the top coffee button once to brew a single cup coffee (single light illumi-
nates).
• Press top coffee button twice to brew a double cup coffee. (double light illumi-
nates)
• Press and hold the top coffee button for 3 seconds (both lights illuminate), brew
a large cup of coffee.
• The unit can brew espresso according to your setting, and it can stop automati-
cally, when the light is solidly lit, it means brewing is finished.
• Press the button again if you want to stop the brewing process (eg. if the cup
gets full!)
• Warning: after coffee is finishing brewing, please don't take out filter immedi-
ately, just wait for 10 seconds.
SK22150_IM.indd 13
HOW TO USE
13
06/08/2020 09:21