Swann Retro SK22150 Manual page 12

CHOOSE THE FILTER
Select the filter to be used as follows:
FOR A SINGLE SHOT– use the filter for a single
shot of espresso if using ground coffee
FOR A DOUBLE SHOT OR TWO SINGLE SHOTS -
use the deeper filter for a double shot.
Note: If using filter pods, use ESE (45mm type)
FILLING WITH COFFEE
Place selected filter in the porta-filter as follows:
FOR GROUND COFFEE:
• Fill the filter with fresh, fine ground espresso coffee (do not overfill). Note: the
ground coffee amount can't exceed the MAX mark.
• Tamp and compress firmly and evenly ground coffee.
• Clean any excess coffee from the rim to ensure proper fit under brew head.
FIT THE PORTA-FILTER
• Position porta-filter underneath the brew head, attach it by first moving retainer
clip back.
• Position handle so that the handle lines up with the open lock icon on the unit
and fits into the groove.
• Then, slowly turn it to the right until the retention clip is aligned with the closed
lock symbol on the unit. See drawing on page 9
• Note: The frothing tube gets very hot. Please take care
SK22150_IM.indd 12
HOW TO USE
12
06/08/2020 09:21