Advertisement
Metal chain
Tank cover
1
8. Installation of flushing actuator
Remove the tank cover.
Place flushing actuator above the sealed
floating ball in the tank.
NOTE: When installing the flushing actuator, you can
adjust the position of stainless steel so as to fit the tank cover properly.
Connect the salient point of the rotary table on "flushing actuator" and
the hang clasper on the "sealed floating ball" with "metal chain".
NOTE: 1. Buckling and hanging points on the "sealed floating ball"
shall be near to the floating ball.
2. Twining on the primary manually lifting and pulling metal strip is not
allowed.
3. When installing the metal chain, you need to adjust the length of the
chain tailored to tank mechanism(Adjust S-hook to the proper position
in the chain, ensuring the chain is fully stretched and locked straight by
S-hook).
Rotate the auto flush dial manually. Ensure the dial can lift up the
sealing float completed in the rotation to achieve best flushing effect.
Press
Cover the tank cover properly.
Kohler Co.
key to double confirm the flushing mechanism works smoothly.
Flushing
actuator
2
Sealed floating
ball
Sealed floating
ball
Stainless steel
Rotary table
3
Flushing
actuator
4
9
Bump
1103349-T01-B
S-hook
Advertisement
