Advertisement
Installation Step：
＞ 4 5mm
6 m
7. Installation of Remote Controller Holder
Choose a mounting location for the remote holder that is easily
accessible while sitting on the seat.
Drilling two holes with depth larger than 45mm on the wall by drill with
a diameter of 6mm in accordance with the position of screw holes on
the remote control holder. Installing the expansion tube into the holes.
Placing the installation holder on the fixing hole.
Peeling off the release paper of double-sided tape at the back of holder.
Fixing the holder with screws and install it.
Installing the screw covers on the screws.
Placing the remote controller on the
holder.
NOTE: if the wall for installation is made of
special material (such as wood board,
density board and etc.), suitable fixing
methods shall be adopted.
1103349-T01-B
m
Remote
Controller
Expansion
Remote Holder
Tube
Screw Cover
8
Double-Sided
Tape
Expansion
Screw
Kohler Co.
Advertisement
