Related Manuals for QSC MH-1060
Summary of Contents for QSC MH-1060
- Page 1 Cinema Mid-High ® Loudspeaker System User Manual MH-1060 10” (254 mm) mid, 2.4” (60 mm) compression driver TD-001524-01-B *TD-001524-01*...
-
Page 2: Explanation Of Symbols
QSC authorized service station or an authorized QSC International Distributor. QSC is not responsible for any injury, harm or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs. - Page 3 Attaching to Low Frequency Enclosure The mid-high loudspeaker assembly attaches to the top of the QSC low frequency cabinet with three M8 bolts, 20 mm long, with lock washers. This hardware ships installed on the low frequency cabinet. We recommend the use of serviceable thread locking compound when installing the bolts to prevent loosening due to vibration.
-
Page 4: Input Terminals
— Figure 4 — NOTE: Maintain proper loudspeaker connection polarity throughout the entire system for maximum performance. Do not apply full range signal (with <200 Hz content) to the MH-1060! Do not connect any signal to the upper sets of OUTPUT terminals. TD-001524-01-B... -
Page 5: Specifications
Subject to change without notice Frequency Range 20 Hz – 20 kHz (Full Space, with QSC processing, 1/3 octave smoothing) Nominal Coverage 90° horizontal X +20 to -30° vertical (50° total, adjustable mount provides for vertical plane adjustments. The horizontal plane can be adjusted by altering mounting position on the low frequency enclosure before tightening bolts. -
Page 6: Mailing Address
E-mail: info@qsc.com cinematechsupport@qsc.com © 2018 QSC, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All trademarks are the property of their respective owners. http://patents.qsc.com.