Installation/Setup - MC Crypt PA-Powerset XPA225 Instruction Manual

Installation/Setup

When selecting the set-up or installation site, observe that direct sunlight, vibration, dust, heat,
cold and moisture must be avoided. There also must not be any strong transformers in the
proximity.
Ensure sufficient ventilation when setting up the device with other equipment. Keep a sufficient
distance from heat sources. Never put up the devices in direct proximity of heat sources. Do
not point any strong spotlights or light sources towards the amplifier. This may cause
overheating (danger of fire!).
Heat removal from the device must not be obstructed. Never place it on any soft surfaces such
as a carpet or a bed. Never cover the device's ventilation openings. Air circulation must not be
obstructed by objects such as magazines, tablecloths, curtains or similar. This prevents heat
dissipation and may lead to overheating (danger of fire!).
Always remove both rack covers in operation if the amplifier is rack-mounted!
Only operate the amplifier on a stable underground that is not sensitive to heat, and in a
horizontal position; otherwise, air circulate is not warranted correctly.
Ensure secure attachment or stable set-up. The devices are heavy and therefore pose
considerable danger of accidents.
Do not drill or screw any additional screws into the casing for mounting. This may expose
dangerous voltage to touch.
If you set up the speakers elevated or stack several speakers on top of each other, the speakers
must be secured with the corresponding safety devices. Ensure that the attachment material
and anchoring areas are sufficiently sized for the load.
Serious injury to persons can be caused if the speaker boxes fall down. The speakers therefore
must be secured by experienced and trained staff.
It is not permitted to suspend the speakers from the carrying handles or any other fittings.
Make sure that the connection cables are not squeezed or damaged by sharp edges. Always
place cables so that no one can trip over them or be caught in them. Danger of injury!
The cables must be sufficiently long. Do not put any mechanic strain on them. This may damage
the cables or devices. There is a risk of dangerous electric shock.
24