Gastro-M C-800 Manual page 16

After receive the icemaker and un-package please recycle the packaging as
per the country laws. Inside the icemaker will find a plastic bag with feet,
inlet and outlet hose ready to install and produce ice.
Lift the icemaker from one side and install the foot to every corner of the
icemaker's base.
In the back of icemaker, please find the inlet and outlet of water. Connect to
the outlet of water the hose with ribs the one side and the other installs it in
the store's drain. The other hose, has bolts in both sides, must connect to
the icemaker and a tap. Please also install the 2 rubber gask ets provided in
the plastic bag to each side of the hose.
The icemaker MUST be higher than the store's drain or else the water from
storage will remain in storage and will melt the ice.
INSTALLATION:
14