Table of Contents
Advertisement
Q u i n t e z z RADAR ALERT
8.4
WARNING
The TMC-system works with fixed locations on the A-roads and almost all N-roads. These locations
are situated a few kilometers from each other. On the moment a flash-notification is broadcasted via
TMC, not the hectometer-picket is shown, but the TMC location. This TMC-location can vary a few
kilometers from the real location of the camera. To make sure a warning is given in time, the QUINTEZZ
RADAR ALERT will give a warning at a distance of 5 km before the TMC-location.
First of all the next display will be shown:
And you will hear the warning 'Be Careful'. This warning will be repeated if you are at a distance of 4,
3, 2 or 1 Km of the TMC-location. This is independent of your direction of driving. So it could be that
you receive a warning that is meant for a road near-by. That is why the road number is shown in the
display.
If you are at a distance of less than 1 km of the TMC-location, the following display will be shown:
And you will hear the warning 'Be Careful'. If the distance between your position and the TMC-
location becomes larger, no notification will be shown. This is the case when you have passed the
TMC-location.
8.5
UPDATING TMC-LOCATIONS
After installation you will also find a TMC-button in the software. Through this option you can load
new TMC-locations in the RADAR ALERT, if the TMC-system should change in the future, or expand
with more roads.
A. MODE SELECTION
B. WARNING LIMIT
C. ILLUMINATION
D. SET UNIT
E. TIME ZONE
F. CLOCK BELL
G. RESET ODO
H. VOLUME LEVEL
English
DEFAULT SETTINGS
: DRIVING MODE
: 130 KMH
: 100 %
: KMH
: GMT +0
: ON
: NO
: 80%
16
Advertisement
Table of Contents
