AMX ENV-VST-C Operation/Reference Manual page 27

5-Day Forecast Commands
FH
Forecasted 5-day
high temperatures
FL
Forecasted 5-day
low temperature
FK
Forecasted 5-day
weather
conditions
ViewStat Color Communicating Thermostat
TSTORM for Thunder Storms
UNK for Unknown
VCOLD for Very Cold
WINDY
Syntax:
FH <HT1> <HT2> <HT3> <HT4> <HT5>
Variable:
HTx = The high temperature in degrees expected for day x, where x = 1 is the current
day, 2 is the next day, etc.
Example:
SEND_COMMAND 'FH 78 82 85 84 85'
Five-day high temperatures.
Syntax:
FL <LT1> <LT2> <LT3> <LT4> <LT5>
Variable:
LTx = The low temperature in degrees expected for day x, where x = 1 is the current day,
2 is the next day, etc.
Example:
SEND_COMMAND 'FL 37 39 40 41 38'
Five-day low temperatures.
Syntax:
FK <KY1> <KY2> <KY3> <KY4> <KY5>
Variable:
KYx = The weather condition expected for day x, where x = 1 is the current day, 2 is the
next day, etc.
Example:
SEND_COMMAND 'FK SNOW ICE SNOWSW SNOWFL SLEET'
Five-day weather condition forecast.
Programming
21