AMX ENV-VST-C Operation/Reference Manual page 23

4. Carefully feed the wires and wire-nuts through the ½" hole and into the wall. Use your hands to
lightly screw the threaded outer case into the hole in the wall as shown in FIG. 15.
5. Use a screwdriver to screw the threaded outer case of the sensor the rest of the way into the ½" hole
in the drywall. Be careful to not pinch the wire while you are screwing in the case. Screw the case
into the wall until the front surface of the case is inserted just past the surface of the drywall (see
FIG. 16).
ViewStat Color Communicating Thermostat
FIG. 15 Outer case screwed into wall
FIG. 16 Screwing the outer case into the wall
Installation and Wiring
17