Tool Preparation - Rehau RAUTOOL XPAND QC Operating Instructions / Technical Information

TOOL PREPARATION

Charging the battery
Caution! Risk of injury .
Improper handling of the tool may result in
personal injury and/or material damage
- To charge the battery, only use single-phase alter-
nating current at the voltage indicated on the power
rating label
- Charge the battery only by using the charger
provided. Using a different battery or different
charger may cause an explosion
- Never operate the charger in an environment
presenting the risk of fire or explosion
- Do not expose the charger to rain or snow
- After charging or before any cleaning, disconnect the
charger from the power source
- Make sure that the battery contacts cannot be shor-
ted by metal objects, such as screws, tools, nails etc.
(for example, by carrying them in the pockets)
To charge the battery, connect the charger to the
electric power mains and push the battery securely
into the charger. Charging takes about 22 minutes.
The battery charge level is indicated by the LEDs on
the charger.
26