Belden Grass Valley CopperHead 3404 User Manual
  1. Manuals
  2. Brands
  3. Belden Manuals
  4. Industrial Equipment
  5. Grass Valley CopperHead 3404
  6. User manual
Belden Grass Valley CopperHead 3404 User Manual

Belden Grass Valley CopperHead 3404 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CopperHead 3404 User Guide
M4051-9900-103
6 April 2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Grass Valley CopperHead 3404 and is the answer not in the manual?

Questions and answers

Related Manuals for Belden Grass Valley CopperHead 3404

Summary of Contents for Belden Grass Valley CopperHead 3404

  • Page 1 CopperHead 3404 User Guide M4051-9900-103 6 April 2016...
  • Page 2 Copyright & Trademark Notice Copyright © 2013–2014, Grass Valley. All rights reserved. Belden, Belden Sending All The Right Signals, and the Belden logo are trademarks or registered trademarks of Belden Inc. or its affiliated companies in the United States and other jurisdictions.

  • Page 3: Table Of Contents

    Table of Contents 1 About CopperHead 3404 ....... . 1 About CopperHead 3404 .
  • Page 4 Table of Contents Area A - Front Panel Optical Connector (Optional)......28 Area B - Audio Indicators .
  • Page 5 CopperHead 3404 Transceiver System User Guide Adjusting Intercom Sidetone ..........64 CopperHead 3404 Camera Unit Audio/Intercom/IFB 4-Switch Panel.
  • Page 6 Table of Contents...

  • Page 7: About Copperhead 3404

    About CopperHead 3404 This chapter provides an overview of the CopperHead 3404 Transceiver System and includes the safety and warranty information about it. About CopperHead 3404 ............. . 2 Unpacking the CopperHead 3404 Transceiver System .

  • Page 8: About Copperhead 3404

    About CopperHead 3404 About CopperHead 3404 About CopperHead 3404 The CopperHead 3404 Transceiver System is a camera video, audio, and data multiplexing system that isinstalled between a portable video camera and its power source.It is connected via a single fiber optic cable to a Base Station in a truck, studio, or other video production setup.

  • Page 9: Optical Fiber Safety

    There are no user adjustments inside the CopperHead 3404. Do not attempt any type of service to this instrument other than any as instructed this manual. Refer all servicing to Grass Valley, a Belden Brand. Always keep the Fiber Optical connectors protected. when not connected. Use protective caps if available.

  • Page 10: Unpacking The Copperhead 3404 Transceiver System

    About CopperHead 3404 Unpacking the CopperHead 3404 Transceiver System Unpacking the CopperHead 3404 Transceiver System The following table lists the various items shipped with a system depending on the particular configuration. CopperHead System Type Hybrid Fiber - Hybrid Fiber - Tactical Fiber (local Standard Power High Power...

  • Page 11: Product Returns

    CopperHead 3404 User Guide Product Returns In the unlikely event of damage to your CopperHead 3404 Transceiver System during shipping or delivery please note the damage with the delivery or shipping service and document the packaging and product where you see damage. If any component does not work correctly out of the box, please contact Grass Valley (see Contact Us on page 81).
  • Page 12 About CopperHead 3404 Product Returns...

  • Page 13: System Overview

    System Overview This chapter provides a system overview about the Fiber Cables and the Transceiver System. Fiber Cable Concepts ..............8 Signal paths in the CopperHead 3404 Transceiver System .

  • Page 14: Fiber Cable Concepts

    System Overview Fiber Cable Concepts Fiber Cable Concepts Fiber Optics and Fiber Optic Cable are the core technologies at the heart of the CopperHead 3404 Transceiver System. The ability to multiplex and de-multiplex a variety of video, audio and data signals so that they can be carried over a thin strand of Fiber Optic cable for long distances enables the CopperHead System.

  • Page 15: Fiber Optic Connector Types

    CopperHead 3404 User Guide Fiber Optic Connector Types Depending on the type of Fiber Optic Cable used, different Connector types can be configured. The following table summarizes the various types of connectors typically used in a CopperHead 3404 Transceiver System configuration and the allowed Fiber Optic Cable usage.

  • Page 16: Signal Paths In The Copperhead 3404 Transceiver System

    System Overview Signal paths in the CopperHead 3404 Transceiver System Signal paths in the CopperHead 3404 Transceiver System The CopperHead 3404 Transceiver System utilizes an optical fiber link between the Base Station and the Camera Unit to carry all of the required signals necessary for operation of the camera and associated production equipment.

  • Page 17: Copperhead 3404 Transceiver System Block Diagrams

    CopperHead 3404 User Guide CopperHead 3404 Transceiver System Block Diagrams Low Power Version Fig. 2-4: CopperHead System Model 3404 Low Power Version Block Diagram...

  • Page 18: High Power Version

    System Overview High Power Version High Power Version Fig. 2-5: CopperHead System Model 3404 High Power Version Block Diagram...

  • Page 19: Copperhead 3404 Transceiver System Components

    CopperHead 3404 Transceiver System Components The chapter describes the CopperHead 3404 components. CopperHead 3404 Camera Unit Overview ..........14 CopperHead 3404 Base Station .

  • Page 20: Copperhead 3404 Camera Unit Overview

    CopperHead 3404 Transceiver System Components CopperHead 3404 Camera Unit Overview CopperHead 3404 Camera Unit Overview Camera Unit Front Side Camera Unit Back Side (attached (attached to the camera) to the battery/power supply) Fig. 3-1: CopperHead 3404 Camera Unit, Front and Back Sides The actual appearance of your CopperHead 3404 Camera Unit will vary depending on the battery mount and fiber cable connection options specified at the time of purchase.

  • Page 21: Copperhead 3404 Transceiver System Additional Components

    CopperHead 3404 User Guide CopperHead 3404 Transceiver System Additional Components In addition to the CopperHead 3404 Camera Unit and Base Station the system consists of: • External Power Supply or Power Cord for the Base Station (depending the unit configuration) •...
  • Page 22 CopperHead 3404 Transceiver System Components CopperHead 3404 Transceiver System Additional Components...

  • Page 23: Feature Detailed Description

    Feature Detailed Description This chapter describes in detail each element on the Camera Unit and Base Station of the CopperHead 3404 Transceiver System. Physical installation of the system and system connections and practical operation are covered in following chapters. For an overall view of component location, see the CopperHead 3404 Transceiver System overall diagrams in System Overview Diagrams on page 104.

  • Page 24: Copperhead 3404 Camera Unit

    Feature Detailed Description CopperHead 3404 Camera Unit CopperHead 3404 Camera Unit CopperHead 3404 Camera Unit Front Side Fig. 4-1: CopperHead 3404 Camera Unit Front Side The front side of the Camera Unit has five features: • A: Connector Panel (see Area A - Connector Panel on page 19) •...

  • Page 25: Area A - Connector Panel

    CopperHead 3404 User Guide Area A - Connector Panel Fig. 4-2: Connector Panel For additional information about the signals carried on these connectors, see Signal paths in the CopperHead 3404 Transceiver System on page 10. • 18: Time Code In (to Base Station) - provides feed of local camera time code or for the provision of a master synchronization time code for all other cameras (typically from Camera 1 and only if not master TC generator at base) •...

  • Page 26: Area C - Signal/Data Indicators

    The Sony V-mount and the Anton Bauer mount are the most common. PAG and other battery mount systems are available by special order. Please contact Grass Valley, a Belden Brand or your authorized dealer. Area C - Signal/Data Indicators Fig.

  • Page 27: Area D - Optical Link Signal Strength Indicator & Power Switch

    CopperHead 3404 User Guide • VBS 3 (Prompter) is used for Prompter Feed (one way from Base Station to Camera) • 3: Program Audio Channels 1 & 2 - Monitors program audio from Camera Unit to Base Station and return audio from Base Station to Camera Unit. •...

  • Page 28: Area E - Fan Control Switch And Indicators

    Feature Detailed Description CopperHead 3404 Camera Unit Front Side • Push and hold adjusts LED indicator brightness. • 12: Power Indicator LED - Green indicates power is applied to the camera control unit. Blinking Green indicates a camera control unit error. Refer to DIAG display mode for details - see The CopperHead 3404 Camera Unit Digital Display on page 71.

  • Page 29: Copperhead 3404 Camera Unit Back Side

    CopperHead 3404 User Guide CopperHead 3404 Camera Unit Back Side For additional information about the signals carried on these connectors, see Signal paths in the CopperHead 3404 Transceiver System on page 10. Throughout this document, component Key Numbers are coordinated with the overall system diagrams (see System Overview Diagrams on page 104).

  • Page 30: Area A - Connector Panel

    Feature Detailed Description CopperHead 3404 Camera Unit Back Side Area A - Connector Panel Fig. 4-8: Connector Panel • 9: 4K - 3G/HD/SD SDI In - Activity indicators are below each SDI connector (to Base Station) • 10: HD/SD-SDI In (to Base Station) •...

  • Page 31: Area B - Audio/Intercom Connector Panel

    CopperHead 3404 User Guide Area B - Audio/Intercom Connector Panel Fig. 4-9: Audio/Intercom Connector Panel • 3- Intercom Head Set Connector • 4 - Audio 1 & 2 Output (from Base Station): typically for return audio from the Base Station •...

  • Page 32: Area D - Miscellaneous Connectors

    Feature Detailed Description CopperHead 3404 Camera Unit Back Side • 18 - Sidetone Control • 19 - Intercom Talk Control • 20 - Intercom Local/Remote • LOCAL- Switch 18 is enabled • REMOTE- Remote Push-to-Talk Switch enabled For information on the Audio/Intercom Connector Panel operation, see Understanding Intercom Usage with the CopperHead 3404 on page 62..

  • Page 33: Area F - Battery Mount

    The CopperHead 3404 Camera Unit is shipped with a variety of Battery Mount to camera types. The Sony V-mount mount and Anton Bauer are the most common. PAG and other battery mount systems are available by special order. Please contact Grass Valley, a Belden Brand or your authorized dealer.

  • Page 34: Copperhead 3404 Base Station

    Feature Detailed Description CopperHead 3404 Base Station CopperHead 3404 Base Station The CopperHead 3404 Base Station is available with a number of options. The unit is ordered with a specified Power Module, Audio/Intercom Module and Fiber Connector. For an overall view of component location, see the overall diagrams in System Overview Diagrams on page 104.

  • Page 35: Area B - Audio Indicators

    CopperHead 3404 User Guide Area B - Audio Indicators Fig. 4-16: Audio Indicators LED Indicators to the left side of the label indicate signal paths from the Camera Unit to the Base Station.The right side LEDs indicate signal paths from the Base Station to the Camera Unit.

  • Page 36: Area D - Signal Strength Indicators/Setup

    Feature Detailed Description CopperHead 3404 Base Station Front Panel Area D - Signal Strength Indicators/Setup Fig. 4-18: Signal Strength Indicators/Setup • 10: Signal Strength Readout in dBm - This display changes between display modes when selected. • 11: Readout Function Indicator •...
  • Page 37 CopperHead 3404 User Guide • Red when it is not communicating with the Camera Unit • FIBER LINK - indicates the optical power status of the Base Station and camera • Green when both the Base Station and camera optical power are within a normal range.

  • Page 38: Copperhead 3404 Base Station Back Panel

    Feature Detailed Description CopperHead 3404 Base Station Back Panel CopperHead 3404 Base Station Back Panel Fig. 4-20: CopperHead 3404 Base Station Back Panel • A: Power & Fiber Connectors (see Area A - Power & Fiber Connectors (Power Module) on page 32) •...

  • Page 39: Area B - Sync/Data/Control Connectors

    CopperHead 3404 User Guide Internal Power Options Fig. 4-22: Internal Power Options Internal Power with OpticalCON Connector • 1: AC Power Receptacle and 4AMP Dual Fuse Assembly - 100-240V 50/60 Hz (see Power Fuses on page 3 • 2: For Future Use •...

  • Page 40: Area C - Video/Ethernet Connectors & Indicators

    Feature Detailed Description CopperHead 3404 Base Station Back Panel • 10: Camera Remote Control Panel Connector • 11: Data/GPI Multi-Pin Connector Area C - Video/Ethernet Connectors & Indicators Fig. 4-24: Video/Ethernet Connectors & Indicators • 12: Ethernet connector - 10BaseT/100BaseT •...

  • Page 41: Area D - Audio/Intercom Connectors

    CopperHead 3404 User Guide Area D - Audio/Intercom Connectors RTS TW Intercom Four Wire Intercom Module Clear-Com Intercom Module Fig. 4-26: Audio/Intercom Connectors The CopperHead 3404 Base Station can be configured with one of three different Intercom Options. The connection and practical use of each of these options is covered in Operation of CopperHead 3404 Transceiver System on page 59.

  • Page 42: Additional Copperhead 3404 Transceiver System Items

    Feature Detailed Description Additional CopperHead 3404 Transceiver System Items Additional CopperHead 3404 Transceiver System Items Your CopperHead 3404 Transceiver System may include of one or more of the following items. • Portable fiber reel with fiber per your purchase order •...

  • Page 43: Mps External Power Wafer Power Supply

    CopperHead 3404 User Guide Up to 95 watts of power can be delivered to the camera, Camera Unit and camera powered accessories. Up to 780 feet (240 meters) of cable can be used when the Camera Unit is powered directly from the Base Station. Please ensure that the power provided is adequate for the camera in use with your system.

  • Page 44: Powerplus" Camera Adaptor

    Feature Detailed Description "PowerPlus" Camera Adaptor "PowerPlus" Camera Adaptor The CopperHead PowerPlus external power adaptor provides up to 150 watts of 12VDC power and fiber cable signal connectivity from the Base Station to the Camera. It also provides an external power feed of 12VDC and optionally 24VDC. The PowerPlus unit requires the use of the HDX Power Adaptor.

  • Page 45: Hdx Power Unit

    CopperHead 3404 User Guide HDX Power Unit The HDX Power Supply Unit is required when using the PowerPlus Camera Adaptor. The HDX-2ST can be used as a free-standing unit or rack mounted. The HDX-FR-2 for two HDX units is shown below. The unit allows PowerPlus to provide a continuous 100 Watts of 12VDC with peak output of 150 Watts of 12VDC.
  • Page 46 Feature Detailed Description HDX Power Unit...

  • Page 47: Installing And Connecting The System

    Installing and Connecting the System This chapter explains how to install the CopperHead 3404 and how to connect the various components togethre. Installing the CopperHead 3404 Transceiver System ........42 Connecting the CopperHead 3404 Transceiver System .

  • Page 48: Installing The Copperhead 3404 Transceiver System

    Installing and Connecting the System Installing the CopperHead 3404 Transceiver System Installing the CopperHead 3404 Transceiver System Mounting the CopperHead 3404 Camera Unit to the Camera This example illustrates the mounting of a V-Mount battery system. Your system may differ. This case illustrates a configuration where the camera is powered locally at the camera position by a battery.

  • Page 49: Mounting The Power Wafer Unit To The Copperhead 3404 Camera Unit

    CopperHead 3404 User Guide Mounting the Power Wafer Unit to the CopperHead 3404 Camera Unit This example illustrates the use of a camera with a V-Mount battery system. Your system may differ. This case illustrates a configuration where the camera is powered through the Power Wafer option.

  • Page 50: Mounting The Powerplus Unit To The Copperhead 3404 Camera Unit

    Installing and Connecting the System Mounting the PowerPlus Unit to the CopperHead 3404 Camera Unit Mounting the PowerPlus Unit to the CopperHead 3404 Camera Unit This example illustrates use of a camera with a V-Mount battery system. Your system may differ.

  • Page 51: Connecting The Copperhead 3404 Transceiver System

    CopperHead 3404 User Guide Connecting the CopperHead 3404 Transceiver System Prior to connecting your CopperHead 3404 Transceiver System please ensure that each of the required cables is available for use. This includes standard video, audio and data cables as well as custom multi-pin cable sets required for your particular installation (see Available Accessories on page 90.

  • Page 52: Tactical Fiber Between The Base Station And Camera Unit

    The following fiber connection scenarios do not take into account any customized cable and connector installations you may have at your facility. For assistance regarding more complex connection situations please contact Grass Valley, a Belden Brand or your local authorized dealer.

  • Page 53: Smpte Hybrid Fiber Between Base Station And Camera Unit (Infrastructure)

    CopperHead 3404 User Guide SMPTE Hybrid Fiber between Base Station and Camera Unit (Infrastructure) Fig. 5-7: SMPTE Hybrid Fiber between Base Station and Camera Unit (Infrastructure Wiring) Panel mounted fiber connectors can be used for permanent installations such as communications closets, truck connector panels and sports facilities or performance venues.

  • Page 54: Smpte Hybrid Fiber Between The Mps Power Unit And Camera Unit

    Installing and Connecting the System Connections between Base Station and Camera Unit SMPTE Hybrid Fiber between the MPS Power Unit and Camera Unit Fig. 5-8: SMPTE Hybrid Fiber between the MPS Power Unit and Camera Unit Between the Base Station (1) and the External Wafer Power Supply (4) connect a pair of ST Fiber Cables (5).

  • Page 55: Connections To The Copperhead 3404 Base Station

    CopperHead 3404 User Guide Connections to the CopperHead 3404 Base Station Fig. 5-10: CopperHead 3404 Base Unit Connections Multi-Pin Cable Assemblies Used with the CopperHead 3404 Base Station • A: Camera Remote Control (Remote) Connector Connect either your camera manufacturers Camera Remote Control or the Grass Valley Universal Controller - CHRCP-2050A or CHRCP-2050-LCD.

  • Page 56: Connectors Into And Out Of The Copperhead 3404 Base Station

    Installing and Connecting the System Connectors into and out of the CopperHead 3404 Base Station Connectors into and out of the CopperHead 3404 Base Station This information duplicates some of that from above sections. It is presented here to provide a single list of all Base Station connections. Key numbers refer to the diagram above and to the Overview Diagram found in System Overview Diagrams on page 104.
  • Page 57 CopperHead 3404 User Guide • 12 - Ethernet Connector - 10Bt/100Bt capable: Designed to carry IP traffic data between the Base Station and the Camera Unit. A laptop PC or other device such as a Wireless Access Point can be connected to the Production Environment IP network.

  • Page 58: Connections To The Copperhead 3404 Camera Unit

    Installing and Connecting the System Connections to the CopperHead 3404 Camera Unit Connections to the CopperHead 3404 Camera Unit Fig. 5-11: CopperHead 3404 Camera Unit Back Side Connections This information is presented here to provide a single list of all Camera Unit connections. Key numbers refer to the diagram above and to the Overview Diagram found in System Overview Diagrams...

  • Page 59: Connectors Into And Out Of The Copperhead 3404 Camera Unit Back Side

    Multi-Pin Connector A - 10 Pin Hirose Connector. This is normally a Grass Valley, a Belden Brand supplied cable. It connects the Camera Unit to the Camera CCU in to allow operation of the Camera Remote Control Panel. Please see Available Accessories on page 90 for a list of available cables.
  • Page 60 Installing and Connecting the System Connectors into and out of the CopperHead 3404 Camera Unit Back Side • 13: VBS Out BNC Connector - Carries SD Analog video from the Base Station the Camera Unit. Typically this will feed an analog viewing monitor at the camera location. •...

  • Page 61: Connectors Of The Copperhead 3404 Camera Unit Front Side

    CopperHead 3404 User Guide Connectors of the CopperHead 3404 Camera Unit Front Side Fig. 5-12: CopperHead 3404 Camera Unit Front Side Connections • 18: Time Code In BNC Connector - Carries Time Code signal from the Camera to the Camera Unit. This is return time code to the Base Station.

  • Page 62: Camera Unit Connection Example

    Installing and Connecting the System Camera Unit Connection Example Camera Unit Connection Example Your CopperHead 3404 Camera Unit and your camera will look something like this once you have connected the various signal paths. Each camera setup will be different depending on your model.

  • Page 63: Camera Unit (Power Adaptor Or Battery Facing Side) To Camera Connections

    CopperHead 3404 User Guide Camera Unit (Power Adaptor or Battery Facing Side) to Camera Connections Fig. 5-15: Camera Unit Video Connections...

  • Page 64: Camera Unit Audio And Data/Control Connections

    Installing and Connecting the System Camera Unit Audio and Data/Control Connections Camera Unit Audio and Data/Control Connections Fig. 5-16: Camera Unit Audio and Data/Control Connections Note: Not all camera models have all available connections to the CopperHead Camera Unit.

  • Page 65: Operation Of Copperhead 3404 Transceiver System

    Operation of CopperHead 3404 Transceiver System This chapter describes howto operate the CopperHead 3404 Transceiver System. Please keep in mind that a wide variety of options and variations are available in using this product, so not every possible operational environment can be described. Variations in camera type, battery and powering, fiber cable connections and intercom allow for an enormous number of slightly different operational modes.

  • Page 66: Set Up Of The Copperhead 3404 Transceiver System For Operation

    Operation of CopperHead 3404 Transceiver System Set Up of the CopperHead 3404 Transceiver System for operation Set Up of the CopperHead 3404 Transceiver System for operation This section provides an overview of setup of the CopperHead 3404 Transceiver System for operation.

  • Page 67: Powering The System

    4 REV display: The LED color test is followed by REV and the revision of the display microcontroller firmware. 5 Scrolling: The REV indication is followed by "www.miranda..com" scrolling across the four-character display. If there's no scrolling please contact Grass Valley, a Belden Brand support for assistance (see Contact Us on page 81).

  • Page 68: Understanding Intercom Usage With The Copperhead 3404

    Operation of CopperHead 3404 Transceiver System Understanding Intercom Usage with the CopperHead 3404 Understanding Intercom Usage with the CopperHead 3404 The CopperHead 3404 Transceiver System is delivered pre-configured with one of three intercom options: • Standard Four Wire Intercom • Clear-Com Intercom •...

  • Page 69: Copperhead 3404 Camera Unit Intercom Operation

    CopperHead 3404 User Guide CopperHead 3404 Camera Unit Intercom Operation Fig. 6-1: Audio Interface Box Detail (Camera Unit) • LISTEN: To set listening level for an intercom channel or the PROGRAM Audio, adjust the desired LISTEN control knobs at the top of the Audio Interface box (Figure 6-1: #14, 15, 16).

  • Page 70: Adjusting Intercom Sidetone

    Operation of CopperHead 3404 Transceiver System Adjusting Intercom Sidetone The intercom LEDs with the mic open and audio activity on channel 1. The intercom LEDs with the mic open and audio activity on channels 1 & 2. Fig. 6-2: Local Activation of Channel 1 Talk Back and Both Intercom Channels The middle position allows both channels to remain in the OFF position.

  • Page 71: Copperhead 3404 Camera Unit Audio/Intercom/Ifb 4-Switch Panel

    CopperHead 3404 User Guide CopperHead 3404 Camera Unit Audio/Intercom/IFB 4-Switch Panel Fig. 6-4: Audio/Intercom/IFB switch panel 1 Audio Input LINE/MIC Switch • Left position sets audio inputs to line level (+4dB) • Right position switches audio inputs to MIC level and enables Switch #2 2 MIC Input Level Switch •...

  • Page 72: A Brief Guide To Measurement Of Fiber Optic Signal Strength

    Operation of CopperHead 3404 Transceiver System A Brief Guide to Measurement of Fiber Optic Signal Strength A Brief Guide to Measurement of Fiber Optic Signal Strength The CopperHead 3404 Transceiver System operates within a defined fiber optic link margin, based on two factors: •...

  • Page 73: The Copperhead 3404 Base Station Digital Display

    CopperHead 3404 User Guide The CopperHead 3404 Base Station Digital Display The Base Station digital display has three functions selected by the Display Mode Selector (#12 on the Overview Diagram). These functions are indicated by the Display Mode LEDs. • BASE RX - Base Station Optical Power or Signal Strength that is being generated at the Base Station and sent to the Camera Unit.
  • Page 74 Operation of CopperHead 3404 Transceiver System The CopperHead 3404 Base Station Digital Display Typical Display Mode Readout Base Station Digital Display Activity Explanation Push and hold the Display Select Button and the system advances to Diagnostics mode - DIAG LED is lit. You can view diagnostic display cycle in any sub-mode - the diagnostics cycle through Temperature, Power, Revision, and Camera Status.
  • Page 75 Instead of OK, the display will show ERR if a power level is outside of normal - ERR is followed by a Hexadecimal code. Please note the error code and contact support at Grass Valley, a Belden Brand. Display Mode Readout Base Station Digital Display Activity Explanation...
  • Page 76 Operation of CopperHead 3404 Transceiver System The CopperHead 3404 Base Station Digital Display Typical Display Mode Readout Base Station Digital Display Activity Explanation DIAG/REV REVF Indicates that the REV for the DISP board is REVF DIAG/REV BASE Indicates the Base Station main microcontroller board is revision is being queried DIAG/REV Indicates that sub-mode is REV...

  • Page 77: The Copperhead 3404 Camera Unit Digital Display

    CopperHead 3404 User Guide The CopperHead 3404 Camera Unit Digital Display The Camera Unit Digital Display has seven functions selected by the BASE Rx/DIM Selector (#11 on the Overview Diagram in Camera Unit Indicators and Controls on page 106). These functions are indicated only by the activity in the Digital Display.
  • Page 78 Operation of CopperHead 3404 Transceiver System The CopperHead 3404 Camera Unit Digital Display Readout Camera Unit Digital Display Activity Explanation DIAGNOSTIC MODE Temperature (TEMP) A Quick push of the BASE Rx/DIM Selector advances to the TEMP mode TEMP Sequence starts with TEMP to indicate the display mode is temperature MAIN The main Camera Unit controller board temperature will be displayed TEMP...
  • Page 79 CopperHead 3404 User Guide Readout Camera Unit Digital Display Activity Explanation Indicates that mode is REV UBUS Indicates the UBUS microcontroller board is revision is being queried REVH Indicates that the REV for the UBUS board is REVH The BASE Rx/DIM accesses the Camera Unit dimming function. In order to change the brightness of the Camera Unit LEDs push and hold the BASE Rx/DIM selector.

  • Page 80: Best Practices

    Operation of CopperHead 3404 Transceiver System Best Practices Best Practices When operating the system, keep the following in mind: • Protect the Fiber Optic Cable and the Fiber Optic Connectors. Always keep these connectors capped except when connected. • Once the system is set up and running, do not ignore the Optical Power Signal Strength Readouts at either the Camera or the Base Station.

  • Page 81: Troubleshooting

    (see Contact Us on page 81). Take note the exact error code so you can report it to Grass Valley, a Belden Brand support. The hexadecimal errors indicate problems with the power supplies and the internal boards. The Digital Display will indicate ERR and then the actual error code will display. This is a...
  • Page 82 Operation of CopperHead 3404 Transceiver System Troubleshooting...

  • Page 83: Specifications

    Specifications Video, Digital (bi-directional) Interface...................... SMPTE 259M, 292M Data Rate ..................... 270 Mb/s or 1.5 Gbits/s Video, Digital (4K-3G Cam-to-Base) Interface.............. SMPTE 310M, 259M, 292M, 297M, 424M Data Rate ....................19.4 Mb/s to 3.0 Gb/s Video, Digital (all) Input Level....................800 mV (peak to peak) Input/output Impedance...................
  • Page 84 Specifications Intercom Number or channels........................2 Interface types (Base)............RTS, Clear-Com or Four-Wire Frequency Response ................200 - 18KHz ± 3dB Max Distortion.......................<= 0.5% Noise ..........................< -60dBu Max Gain (RTS or Clear-Com) .................. >= 24dB Min Gain (RTS or Clear-Com)..................<= -45dB GPI/Tally Number, Base-to-Camera Unit....................2 Number, Camera Unit-to-Base....................1 Inputs:...
  • Page 85 CopperHead 3404 User Guide Distance Limit The maximum cable length varies due to optical loss that can depend on cable quality, dirt/dust/contamination on connectors, and the number of cable connectors. When using hybrid cable for camera power, the size of the hybrid cable, as well as the power draw of the camera, lens, viewfinder, and other accessories are also factors Tactical Fiber (Local Power at Camera): Standard laser.................
  • Page 86 Specifications...
  • Page 87 Contact Us Grass Valley Technical Support For technical assistance, please contact the Grass Valley Technical Support center nearest you: Americas Asia Office hours: 9:00 a.m. – 9:00 p.m. (EST) Office hours: 9:00 a.m. – 6:00 p.m. (GMT+8) Telephone: 1-800-224-7882 Telephone: +852 2539 6987 Fax: +1 514 335 1614...

  • Page 88: A Connector Pin Assignments

    Connector Pin Assignments This appendix explains how the connectors work on the CopperHead 3404 Camera Unit and the Base Station. Base Station Connectors ............. . 83 Camera Unit Connectors .

  • Page 89: Base Station Connectors

    Base Station Connectors Base Station Connectors Reference Numbers: refer to the Overview System Overview Diagrams on page 104. Item Description AC Power Input Connector- Models CHG3-BS-3404-95VD-xxx-xxx Panel Mounted AC Power Receptacle: 110/220 VAC Two 4 amp fuses (5 x 20mm). Fuses are in operation at all times –...
  • Page 90 CopperHead 3404 User Guide Item Description • Pin 1: Data 2 -422 Out • Pin 2: Data 2 -422 In, -485 I/O • Pin 3: Not Used • Pin 4: GPI 1 In (Tally Red) • Pin 5: GND Base Station #11 •...
  • Page 91 Base Station Connectors Item Description • Pin 1: Ground • Pin 2: +VDC Power & Channel 1 Audio • Pin 3: Channel 2 Audio Base Station #21 XLR3 Male 4-Wire Intercom Function Imedance Signal Ground + Input 600 Ohm Line: +8 dBm Input - Input Mic: -32 dBm...
  • Page 92 CopperHead 3404 User Guide Audio Input & Output DB25 Pin Number Audio In Audio Out Channel Hot Cold Ground Return Cam Audio Audio 1 In 1 Out Return Cam Audio Audio 2 In 2 Out Return Not Used Audio 3 In Return Not Used Audio 4 In...

  • Page 93: Camera Unit Connectors

    Camera Unit Connectors Camera Unit Connectors Item Description Camera Remote: Data 1 (Camera Control) and Data 3 (RS232) • Pin 1: +12VDC Input Power (also Camera Control Data Format Select Bias) • Pin 2: 12VDC Input Power - Ground • Pin 3: Camera Control Data (+) Input or Di-directional Camera Control Data I/O •...
  • Page 94 CopperHead 3404 User Guide Item Description • Pin 1: MIC Ground (shield) • Pin 2: + MIC Input • Pin 3: - Earphone Output Ground • Pin 4: + Earphone Output • Pin 5: + Earphone Output Camera Unit #3 XLR5 Female Audio Output •...

  • Page 95: Data 1 (Camera Control) Pinout Configurations

    Data 1 (Camera Control) Pinout Configurations Data 1 (Camera Control) Pinout Configurations Fig. A-1: Data 1 (Camera Control) Pinout Configurations...

  • Page 96: B Available Accessories

    Available Accessories This appendix lists all the accessories available with the CopperHead 3404 system. Accessories ................91...

  • Page 97: Accessories

    Accessories Accessories Item Picture Item Picture CH3-CAM-3404-MX CAXX-MX Camera Unit w/MX Tactical Fiber Assembly, Connector: Tac Fiber MX Connectors only CH3-CAM-3404- CAXX-XT2S-NOC Tactical Fiber Cable Camera Unit w/ Assembly, OpticalCON OpticalCON Connectors connector: Tac or SMPTE Hybrid Fiber CH3-CAM-3404- CAXX-XSM311-NOC 304M SMPTE 311M Hybrid Camera Unit...
  • Page 98 CopperHead 3404 User Guide Item Picture Item Picture MXRE CAXX-XSM311-SMPTE MX Receptacle SMPTE 311M Hybrid Flange Mount Fiber Cable Assembly, Assembly Breakout SMPTE 304M to STs connectors PWRWFR-95VD- MXRV FSR-AB MX Receptacle Jam Nut Power Wafer Camera Assembly Breakout to Adaptor (for use with CH Series 3404- BS-95VD)
  • Page 99 Accessories Item Picture Item Picture PWRPLUS-1MX/NO CH3BFC-304M-NOC- 08-XX Long Distance "PowerPlus" Camera SMPTE Hybrid 304M Adaptor for use with plug to OpticalCON HDX (specify LP or Plug CHCR-XXX CHBR-XXXX Camera Remote Camera Remote Cable, Cable (specify 10 foot camera model) CH2-MPS-95VD- 2ST-XXX or CH2- MPS-95VD-NEU-...

  • Page 100: Wider Illustrations

    CopperHead 3404 User Guide Wider Illustrations Item Picture HDX-2-ST Power Supply for PowerPlus Power Adaptor HDX-FR-2 Rack mount frame for 2 HDX units (specify remote model) CH3-BS-2ST or -NEU Standard Base Station 2 STs or OpticalCON connector CH3-BS-95VD-304 or - NEU or -STM Base Station w/internal Power Supply...
  • Page 101 Wider Illustrations...

  • Page 102: C Multi-Pin Signal Cables

    Multi-Pin Signal Cables This appendix describes how the CopperHead 3404 cables work together with the various components. Camera Signal Cables ..............97 Base station cables .

  • Page 103: Camera Signal Cables

    Camera Signal Cables Camera Signal Cables Cable is Wired with Typical Equipment Cable Description Item Number Connectors Used With Cable Breakout Cable CH3CS-3404- DB15HD to BNC-F, DB9F Ext Intercom BO-BF1-D9F1 Trigger, Ext Tally I/O Base station cables Cable is Wired with Typical Equipment Cable Description Item Number...

  • Page 104: Camera Remote Control Cables

    CHCR-SON-DXC2-10-0 HR10A-10P-10P to DXC-537, DXC- HR10A-10P-10P (10 D30/D35/ D50, pin) DSR570 w/RCP-TX7 or RCP-D50 (no VTR) For information on these and other cable configurations please contact Grass Valley, a Belden Brand (see Contact Us on page 81) or your local CopperHead dealer.
  • Page 105 Camera Remote Control Cables...

  • Page 106: D Multi-Pin Wiring Suggestions

    Multi-Pin Wiring Suggestions This appendix makes suggestions of how to connect the wires in the CopperHead 3404 system. Base Station Breakout Data/GPI Cable ..........101 Base Station 25-Pin Audio Input Cable .

  • Page 107: Base Station Breakout Data/Gpi Cable

    Base Station Breakout Data/GPI Cable Base Station Breakout Data/GPI Cable Fig. D-1: Base Station Breakout Data/GPI Cable for CopperHead 3404...

  • Page 108: Base Station 25-Pin Audio Input Cable

    CopperHead 3404 User Guide Base Station 25-Pin Audio Input Cable Fig. D-2: CopperHead 3404 Base Station 25-Pin Audio Input Cable...

  • Page 109: Base Station 25-Pin Audio Output Cable

    Base Station 25-Pin Audio Output Cable Base Station 25-Pin Audio Output Cable Fig. D-3: CopperHead 3404 Base Station 25-Pin Audio Output Cable...

  • Page 110: E System Overview Diagrams

    System Overview Diagrams This appendix provides a detailed overview of the various features of the CopperHead 3404 system. CopperHead 3404 Transceiver System Base Station Back Panel ..... . . 105 CopperHead 3404 Transceiver System Camera Front and Back Panel .

  • Page 111: Copperhead 3404 Transceiver System Base Station Back Panel

    CopperHead 3404 Transceiver System Base Station Back Panel CopperHead 3404 Transceiver System Base Station Back Panel Fig. E-1: CopperHead 3404 Transceiver System Base Station Back Panel CopperHead 3404 Transceiver System Camera Front and Back Panel Fig. E-2: CopperHead 3404 Transceiver System Camera Front and Back Panel...

  • Page 112: Camera Unit Indicators And Controls

    CopperHead 3404 User Guide Camera Unit Indicators and Controls Fig. E-3: Camera Unit Indicators and Controls CopperHead Base Station Front Panel Fig. E-4: CopperHead Base Station Front Panel...
  • Page 113 CopperHead Base Station Front Panel...

Table of Contents