Countertop Installation - Master Chef EM925A2HC Instruction Manual

8
Product No: 043-2364-0 (EM925A2HC) | Contact us: 1-855-803-9313

Countertop Installation

Remove all packing material and accessories. Examine the microwave oven for any damage such as dents or broken
door. Do not install if microwave oven is damaged.
Cabinet: Remove any protective film found on the microwave oven cabinet surface.
Do not remove the light brown Mica cover that is attached to the microwave oven cavity to protect the magnetron.
Installation
1. Select a level surface that provide enough open space for the intake and/or outlet vents.
A minimum clearance of 3" (7.5 cm) is required between the microwave oven and any adjacent walls. One side
must be open.
(1) Leave a minimum clearance of 12" (30 cm) above the microwave oven.
(2) Do not remove the legs from the bottom of the microwave oven.
(3) Blocking the intake and/or outlet openings can damage the microwave oven.
(4) Place the microwave oven as far away from radios and TV as possible.
Operation of microwave oven may cause interference to your radio or TV reception.
2. Plug your microwave oven into a standard household outlet. Be sure the voltage and the frequency is the same as
the voltage and the frequency on the rating label.
WARNING: Do not install microwave oven over a range cooktop or other heat-producing appliance. If installed
near or over a heat source, the microwave oven could be damaged and the warranty would be void.