Advertisement
Available languages
Available languages
Frequency: 433 Mhz
Coding: Rolling-Code
Channels: 2
Battery: 3V CR2032
Remote Memorizing Process
Press the "RF-learn" button for 2 seconds until the Blue LED comes on; then press the transmitter
(A) button; the Blue LED will blink twice and then be off. The remote is now coded in.
Blue LED ON
RF-Learn
2 Sec
Note: To delete all stored remote control codes, press and hold the "RF-Learn" button for ca. 10 seconds until the blue LED
turns off.
Schartec remote controls meet the requirements of the applicable European and national guidelines. The conformity has been
proven, the corresponding declarations, certificates, test reports and documents are deposited with the manufacturer and can be
requested if required.
As a dealer for the distribution of electronic, battery-operated devices, we are obliged by law to inform our customers about the
following:
Electrical and electronic devices, as well as batteries, must not be disposed of as household or residual waste, but must be delivered
in the appropriate acceptance and collection points will.
The complete version of the battery law can be found here:
Remote Control SR-2
A
B
Blue LED blinks twice
Declaration of Conformity (CE)
Information about battery regulation
http://www.gesetze-im-internet.de/bundesrecht/battg/gesamt.pdf
Blue LED OFF
Advertisement
