D-Link DSL-2750U Technical Support Setup Procedure page 13
How to configure 3g wan fail over
Hide thumbs
Also See for DSL-2750U:
- User manual (210 pages) ,
- Quick installation manual (42 pages) ,
- Setup (14 pages)
Advertisement
Available languages
Available languages
-13-
Step 3: Go to SETUP tab, select '3G Internet Setup' on the left hand side.
Plug in the 3G USB dongle to the USB port at the back of the DSL-2750U. Wait for the "modem
status" to change to "DISCONNECT" (This may take several minutes). After that, Click "Add".
FAQ : How To Configure 3G WAN Fail Over
Advertisement
