Related Manuals for WaterLink SpinTouch BC
Summary of Contents for WaterLink SpinTouch BC
- Page 1 The Future of Water Testing Touch WaterLink Centrifugal Fluidics Photometry Code 3586...
-
Page 3: Before First Use
NOTE: When a prompt to update the fi rmware is received, the options Update Now or Remind Me Later will be displayed. If Remind Me Later is chosen, the update prompt will be displayed again in 23 hours. Or, to update the fi rmware at any time, open WaterLink Connect, go to Settings>Service Settings>Get Updates. -
Page 4: Device Connection
It is not necessary to pair the Spin Touch to the Bluetooth enabled device. Barriers to wireless signals can reduce the range of wireless devices. The WaterLink Spin Touch will work best if there are no walls between it and the receiving devices. - Page 5 FILLING When the syringe is placed in the water sample, and the plunger is pulled all the way up, the syringe will hold more than enough sample water to adequately fi ll the disk. The syringe is held vertically and the tip is inserted into the fi ll hole on the disk. The plunger is pressed slowly and smoothly to fi...
-
Page 6: General Operating Procedures
GENERAL OPERATING PROCEDURES METER When a fi lled disk is placed in the chamber and the lid is closed, the meter spins at high speed to distribute the sample to the test wells. Next the meter slows to maximize the pumping action of the stainless steel mixing beads as the reagents mix with the sample water. - Page 7 TESTING Source CL Treated Tap to Start Test Disk Series BC803 19-May-20 12:14 PM 1. Press and hold until the meter turns on. 2. Tap . Select a Water source. Tap to confi rm. 3. Tap . Select a disk series (found on disk packaging). Tap to confi...
- Page 8 (Not Available) Test History Settings The WaterLink Spin Touch can log test results for 250 water samples in the Test History. The results for the most recent sample will be located at the top of the list. All results can be logged automatically or results for an individual sample can be logged after the sample has been tested.
- Page 9 Print or Send Results to a Bluetooth Phone or Tablet The WaterLink Spin Touch can print to the Mobile Bluetooth Printer or send test results to a Bluetooth-enabled device such as a phone or a tablet. The highlighted will show which function is active.
-
Page 10: Disk Handling
For use of the Meter Check Disk see page 17. USB CABLE ® ® ® A USB cable connects the WaterLink Spin Touch to a Windows -based PC. When used with the AC Power Adapter, it connects the meter to an AC outlet. - Page 11 to prolong the battery life. The standard life cycle of a lithium ion battery is 500 cycles. The battery will fully charge in approximately 10-12 hours. The battery is designed to be charged overnight and should be charged indoors only. The battery is rated at 12 V and 8.1 AH capacity.
- Page 12 Other About… lists the Serial Number, Firmware Version, Bluetooth MAC address, Bluetooth Version and Test Count. The Test Count shows the number of Settings complete tests that have been performed over the lifetime of the meter. to return to the Settings menu. Ranges Enabled allows the option of having test results that are out of the range of the reagent system displayed in red.
- Page 13 DISK DESCRIPTIONS Cooling Water Disk CW801 (Code 4339) Low Range High Range Total Hardness Total Hardness Calcium Bromine Total Alkalinity Hardness Total Chlorine Calcium Hardness Total Chlorine Copper Empty Combined Chlorine Total Hardness Copper Total Iron Total Total Iron Free Chlorine Alkalinity Empty Free Chlorine...
-
Page 14: Accessories And Replacement Parts
Spin Touch ® BC Quick Guide 3586-QG ® ® For available WaterLink Spin Touch BC reagent disks, see page 13. WARNING: only use the USB cable and wall adapter that are supplied with the kit. Make no substitutions. SPECIFICATIONS Instrument Type... - Page 15 Factory set, fi eld calibration via internet connection Firmware Internet updateable (New Test, New Test Calibrations, etc.) Software Android & iOS Apps, WaterLink® Solutions, WaterLink® Connect Power Requirements USB wall adapter, USB computer connection or internal lithium ion rechargeable battery...
-
Page 16: Troubleshooting Guide
Dirty disk cover Gently clean disk cover apertures with pipe cleaner or lint free cloth. Disk type is not an option Software or meter fi rmware is Update WaterLink Connect at in Disk Series out of date. softwarecenter.lamotte.com High pH results Water sample temperature above For water samples over 100 °F... - Page 17 Disc not spinning Lid open, meter not powered on, Close lid, power on meter, charge low battery, disk or disk cover the battery or plug meter into a pressed down too tightly on hub stable power source, remove the disk/disk cover and place back in the meter more gently Fast electrical transients may Restart the test to resume normal...
- Page 18 10. Replace the Meter Check Disk in the foil pouch for storage. LED Calibration The LED Calibration is performed to set the brightness of the individual LEDs. 1. Follow the Cleaning procedure on page 19 to clean the light chamber and optic lenses. 2.
-
Page 19: Helpful Hints
¬ The disk should not contain any large air bubbles. Air bubbles will result in erroneous results. ¬ Always use the disk cover. ® ¬ Only the Universal Disk Cover (Code 1719) can be used with the WaterLink Spin ® Touch ¬... -
Page 20: General Information
Read the instruction manual before attempting to set up or use the instrument. Failure to ® ® do so could result in personal injury or damage to the meter. The WaterLink Spin Touch should not be stored or used in a damp or excessively corrosive environment. Care should be taken to prevent water or reagents from entering the photometer chamber. -
Page 21: Limits Of Liability
CE MARK ® ® The WaterLink Spin Touch meter has been independently tested and has earned the European CE Mark of compliance for electromagnetic compatibility and safety. To view certifi... - Page 24 Compatible with iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPad Air 2, iPad Air, iPad mini 3, iPad mini 2, iPad mini, and iPad (4th generation). Compatible with Android devices. WaterLink ® and DataMate ® are registered trademarks of LaMotte Company.