Page 1
ELECTRICAL WATER HEATER WHF 3511 / WHF 5021 WHF 8021 / WHF 10021 USER MANUAL...
Page 2
Dear Customer, First of all, congratulations for choosing a nature and technology friendly VOX product. Aspiring to offer products above and beyond your expectations, VOX presents which has been manufactured meticulously and qu- ality-controlled rigorously at VOX's modern plants, to your use. This operating manual will guide you through the use of your app- liance.
Contents Safety Warnings ................4 Safety Information on Installation of the Appliance ���������������������4 Safety Information on Use of the Appliance ���������������������������������5 Safety Information to be Considered when Performing Cleaning and Maintenance Procedures ����������������������������������������������������������8 Safety Information to be Considered During Handling and Transportation �����������������������������������������������������������������������������������9 Installation ..................9 Choosing the Mounting Position ���������������������������������������������������9...
Safety Warnings turn on the hot water tap, it me- ans that the appliance is full of Safety Information on Ins- water. tallation of the Appliance WARNING:Using voltage of WARNING:When the wa- your water heater is 230 Volts. ter heater will be mounted and WARNING: Make sure that operated for the first time, ask safety valve is installed onto the...
ponsible for any damage due de in case of a water cut. CAUTION: The following to operations conducted by unauthorised persons. conditions must be observed WARNING: Your water heater while installing and using the sa- has been manufactured for do- fety valve.
Page 6
ding of the electrical circuit, should not stay water-free do not operate any other for a long time. high-power appliance on the • Children should not be al- same circuit. Do not conne- lowed to play with the app- ct with extension cables or liance.
Page 7
mum operating pressure, a authorised service. pressure reducer should be • A damaged appliance or da- connected to the cold water maged parts of the applian- line before the safety valve. ce may cause severe injuries The pressure reducer should and fire.
– Before installation, formance from your electri- – Before cleaning and ma- cal water heater all the time, intenance, it is recommended to clean – Before repairs. the limescale -that may form • Do not drink the water dra- on the resistance due to the ined off from the appliance.
Safety Information to be in areas that are under direct Considered During Hand- sunlight. ling and Transportation • Do not place the appliance While handling the appliance, in areas where partially dan- make sure that all the electrical gerous substances such as connections are disconnected acidic steam, dust or gas are and all the water inside is disc-...
The distances specified in the chart below should be applied in the installation of the appliance. Min 50mm Min 50mm Min 1100mm Electrical Connections of the Water Heater...
General View The images are intended only to provide information on the components of the app- liance. Components may differ according to the water heater model. Pictures are representative. 1.Hot water status light 2.Resistance symbol 3. Thermometer * There is no temperature adjustment button on the water heater.
Functions and Features disconnect the product from the mains in case of an electrical leakage or when of Your Water Heater the product is switched off. The provided Resistance To Corrosion V-Automated Switch should be installed by an authorised service technician only� As the inner drum of your water heater has been enameled after welding all the parts including the water inlet and outlet...
off the fuse. the operation frequencies of these appliances will increase. • Ensure that the water heater is filled • The appliance should be insulated in with water before initial use. order to prevent heat loss from the • Switch on the V-Automated switch. tanks and assembly.
Customer's Elective water from the safety valve is normal. • Drain water from the drum by set- Rights ting the safety valve latch to upright position. To check the operation of The customer, in case the product is found the safety valve, it is recommended defective as per the terms of Protection to set the latch to the upright po- of the Consumers Act, No 6502, even...
Troubleshooting Before calling our technical service in case of a failure, ensure that the failure is not related to a temporary power cut or water cut. When you notice an abnormal situation in your appliance, you may attempt to troub- leshoot according to the following instructions.
Need help?
Do you have a question about the WHF 3511 and is the answer not in the manual?
Questions and answers