Introduction
This chapter lists the parts and accessories for the MT90 and explains how to install, remove and charge the battery, and
power on the MT90 for the first time.
Unpacking
Carefully remove all protective material from the pack and verify that the followings were received:
1 x NLS-MT90 main unit
1 x USB cable
1 x AC adapter for the MT90
1 x Li-polymer battery
1 x Wrist lanyard
1 x Quick start manual
Accessories (Optional)
Charging cradle for the MT90
4-slot battery charger
Trigger handle
RFID handheld reader
Long-range barcode reader NLS-EX90
Protective sleeve
3
Chapter 2 Getting Started