Replacing Components - England's Stove Works 15-W08 Installation & Operation Manual

Hide thumbs Also See for 15-W08:
Table of Contents

Advertisement

Available languages

Available languages

 
 
 
Glass 
 
This unit has a ceramic glass panel (Part No. AC‐G51) in the viewing door; self adhesive glass 
gasket is included with replacement glass (purchase directly from England's Stove Works). Never 
replace ceramic glass with tempered or any other type of glass and never operate this unit with 
cracked or broken glass. 
 
• Glass Size: 20.75 in. (527.05 mm) x 12.625 in. (320.67 mm) 
• Glass Type: 5mm Ceramic Glass (Keralite Pyroceram) 
• Glass Manufacturer: Eurokera 
 
Glass Precautions 
 
1.   Never replace ceramic glass with tempered or any other type of glass. 
 
2.   Never operate this unit with cracked or broken glass. 
 
3.   Do not slam the door or strike the glass with any objects. 
 
4.   Do not build the fire directly against the glass. 
Glass Cleaning 
1.   Be certain the stove and the glass are completely cool. 
 
2.   The build‐up on the glass will generally be light and water is normally sufficient to 
remove the deposits.  If stubborn soot persists, use a cleaner made specifically for this 
purpose.  Do not scrape the glass or use abrasive cleaners. 
 
3.   Rinse the glass with clean water and dry the glass before resuming normal operation. 
Glass Replacement 
1.   Remove the door from the stove and rest it face down on a firm work surface. 
 
2.   Using a 5/16" wrench, remove the four window bracket retaining screws. 
 
3.   Remove the four window tabs from the door.  Take extra care to avoid shards of glass if 
the glass window has been broken. 
 
4.   Lift the old glass panel out of the door and discard. 
 
5.   The glass panel must be wrapped with a self‐adhesive fiberglass tape gasket (AC‐GGK). 
If you purchased a new glass, it will come already wrapped.  If reusing the same piece of 
glass, remove old gasket, scrape off old adhesive and wrapped with the AC‐GGK.  This 
gasket serves to cushion the glass from the cast iron door. 
 
6.   Reinstall the window retaining tabs using the four screws previously removed.  Do not 
over‐tighten the screws. 
 
To remove the decorative insert, simply remove the glass, then the insert. 
 
24
REPLACING COMPONENTS 

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

50-shw0850-shw08l50-trw08

Table of Contents