Freelap FXCHIP Instructions For Use

BATTERY AND BATTERY LIFE
Your FxChip runs on a CR 2032 battery (provided) with a 2'000 hours
battery life.
> Low battery: When the device no longer flashes, it means that the
battery needs to be changed.
> To change the battery: Unscrew the 4 screws on the back of the device
using a screwdriver, then remove the cover and the gasket. Remove the
old battery, and insert a new CR 2032 battery. Put back the gasket, the
cover, and screw back the 4 screws.
MEMORY
Your FxChip has a temporary memory of 10 Laps. This means that your
track must contain a maximum of 11 transmitters.
Your timing data is not stored in your FxChip but in your Relay Coach BLE.
TECHNICAL SHEET
• Dimensions: 36 x 48 x 14 mm
• Weight: 17g
• Technology: Radio transmission
• Compatibility: Relay Coach BLE, Tx Gate Pro, Tx Track Pro, CxUnit with
CxFlag, LED Display
• Minimum time between 2 transmitters : 0.7 seconds
• Accuracy: 2/100 of a second
• Memory: 10 Laps
• Battery: CR 2032
• Battery life: 2'000 hours
• Water resistance: 5ATM
• Operating temperatures: -20°C to +50°C
TECHNICAL SUPPORT
Our FAQ (Frequently Asked Questions), as well as other manuals and user
guides, can be found on our website at:
http://www.freelap.ch/support/
If you cannot find the answers to your questions, please contact your
Freelap dealer. Find the list of Freelap dealers at:
http://www.freelap.ch/freelap-contact/
AFTER-SALES SERVICE & WARRANTY
Your FxChip is guaranteed 2 years. If you have any questions or if you
need assistance with your device, please contact your Freelap dealer.
www.freelap.ch
Follow Freelap on
MADE BY FREELAP SA
Av. D.-Jeanrichard 2A
CH-2114 Fleurier – Switzerland
+41 32 861 52 42 - www.freelap.ch
&
INSTRUCTION FOR USE
FXCHIP
TRANSPONDER OF FREELAP
AUTOMATIC TIMING SYSTEM