Removing The Handle - LG GML8031ST Owner's Manual

Accessories
*1 This feature is only available on some models.
*1
Spanner A
a
*1
Spanner B
b
*1
C-Clip (Snap Ring)
c
d Water Filter
*1
e Water Tube
*1
f Tube Connector
g Tube Connector and Valve

Removing the Handle

When moving the appliance through a narrow
opening, removing the doors is preferred.
The appearance of the handles may vary from what
is shown.
CAUTION
• When removing or refitting the appliance
handle, grasp the handle firmly to avoid
dropping it.
• Make sure that there is not a gap between the
door and handle after assembling the handle.
Removing the Fridge Handle
1
Loosen the set screws
in.) Allen wrench and remove the handle.
2
Loosen the mounting fasteners
to the refrigerator door and handle using a
*1
with a 2.38 mm (3/32
a
that connect
b
6.35 mm (1/4 in.) Allen wrench, and remove the
mounting fasteners.
Removing the Freezer Drawer
Handle
1
Loosen the set screws
side of the handle with a 3.18 mm (1/8 in.) Allen
wrench and remove the handle.
2
Loosen the mounting fasteners
mm (1/4 in.) Allen wrench, and remove the
mounting fasteners.
Refitting the Fridge and Drawer
Handle
Refit the handle in the reverse sequence of their
removal once the appliance has been passed
through all access doors.
INSTALLATION
located on the lower
a
with a 6.35
b
13