Troubleshooting - Parkside 315836 1904 Operation And Safety Notes

Light switches must always therefore be switched
on, so that the conductor is carrying voltage.
All the fuses must similarly be inserted or
switched on.
 
P lease note that only voltages of 230 V ~
50 Hz are detected.
 
I f the display of the product hang-up or the
product doesn't work well, open the battery
cover, move the battery out of battery com-
partment, press the RESET button using a
sharp object. Then the product display will
restart and resume to normal.
Note: Do not disconnect the battery while
using RESET button.
 
S ensors are located just beneath the display
. For better performance, it is not allowed
2
to touch or bring your hands closer to display
or the housing around display
2
dition, always hold the product only along
both the sides with grip and do not touch
other parts while using.

Troubleshooting

Error
If the product does
not react, electro-
static discharge can
affect the function
of the product.
Possible causes
and solutions
Open the battert com-
partment
8
the RESET button
with a pointed object.
. In ad-
2
and press
7
GB/IE 31