Before Using; Inserting / Changing The Battery - Parkside 315836 1904 Operation And Safety Notes

Clean the contacts on the battery / recharge-
able battery and in the battery compartment
before inserting!
Remove exhausted batteries / rechargeable
batteries from the product immediately.

Before using


 
B efore initial use, remove the protective film
from the product display
enclosed battery.
Before using the product, keep the product under
room environment for minimum 1 hour to stabilise
and to perform better.
Inserting / changing
 
the battery
If the battery symbol
display, the inserted battery is almost drained
and must be replaced. Empty batteries can falsify
the measured result.
To insert the battery proceed as follows:
 
O pen the battery compartment cover
the back of the product. You can remove the
used battery more easily with the aid of the
material strip, which is inside the battery com-
partment
 
R emove the used battery.
 
P lug the contacts of the 9 V block battery on
the contacts of the profiled plug. Make sure
you fit the batteries the right way round. This
is specified by the profiled shape of the
26 GB/IE
12
. Just pull on the material strip.
8
and insert the
2
appears in the
on
9