Advertisement
Appearance & Interface Description:
1. USB Charging Input
2. Mute Button
3. Ear Bud
4.Mic
5. Multi-function Button
6. LED indicator
Operation Instructions:
1. Switching Motion On/Off
• Press and hold the Multi-function Button for about 3 seconds to turn on Motion
• Again, press and hold the Multi-function Button for about 3 seconds to turn off Motion
2. Pairing Motion
• Before connecting Motion to your device, make sure that Motion is in pairing mode.
In order to enter pairing mode, press and hold the Multi-function Button for 5 seconds,
until Red and Blue LED start flashing alternately.
• Turn on the Bluetooth function of the device you wish to connect and search
for "Motion". From the list of found devices, select "Motion".
• Motion is now connected to your device.
3. Multipoint Pairing
• Follow the above mentioned steps to pair Motion with first device and turn
off the headset.
• Then, repeat the steps to pair the second device and again, turn off the headset.
• Turn On the headset, but do not enter into pairing mode, the headset will
automatically connect to both the devices.
Advertisement
