Recommended Liquid Gasket; Application Method - Isuzu 2008 N Series Workshop Manual

Recommended Liquid Gasket

Type
Silicon type
(Room temperature
vulcanization process)
Water Base
Solvent
Anaerobic
• Make sure to use a liquid gasket with the above
product name or equivalent.
• Do not use LOCTITE 515, 518 or FMD 127, as
they are anaerobic, and do not provide sufficient
effect when there is a gap larger than 0.25 mm
(0.01 in) between the contact surfaces of metals.
• Use an appropriate amount of liquid gasket. Follow
the handling precautions for the product.

Application method

1. Wipe any water or oil from the contact surface.
Make sure the contact surface is dry.
2. Apply liquid gasket of the specified bead width to
one side of the contact surface. Make sure there
are no cuts in the beads.
Recommended Liquid Gasket
Product name
ThreeBond 1207B
ThreeBond 1207C
ThreeBond 1215
ThreeBond 1216
ThreeBond 1281
ThreeBond 1141E
ThreeBond 1102
ThreeBond 1104
BelcoBond 4
BelcoBond 401
BelcoBond 402
LOCTITE 515
LOCTITE 518
LOCTITE 17430
FMD127
Manufacturer name
ThreeBond
ThreeBond
ThreeBond
ThreeBond
ThreeBond
ThreeBond
ThreeBond
ThreeBond
Isuzu
Isuzu
Isuzu
LOCTITE
LOCTITE
LOCTITE
LOCTITE
General Information
Area used (reference)
Engine oil seal retainer
Engine oil pan
Timing gear case
Cylinder head cover
Fuel pump
Water pump
Rear axle
Etc.
Engine oil seal retainer
Water pump
Transaxle
Etc.
0A-29