Installation Instructions - Linea DOMO DO8141 Instruction Booklet

· Prístroj je určený len pre použitie v domácnostiach. Výrobca ani predajca nie je schopný
držať záruku ani zodpovednosť za vzniknuté riziká z nedodržania týchto zásad alebo
nesprávneho používania.
· Deti sa nesmú dotýkať prívodného kábla ani zástrčky.
· Všetky opravy musia byť vykonávané len v odbornom servise.
· Pred prvým použitím odstráňte všetky reklamné a ochranné polepy.
· Nepoužívajte ventilátor vo vlhkom alebo mokrom prostredí. Ventilátor neumiestňujte do
blízkosti vane, sprchy ani iných objektov s vodou.
ČASTI
1. Ochranná mriežka
2. Ovládací panel
3. Teleskopická trubica
4. Zaisťovacie matice
5. Krížový podstavec
ctions Carefully.
6. Rukoväť
7. Vrtuľa
8. Spínač oscilácie
t must be replaced by manufacturer
9. Diaľkový ovládač
y qualified person in order to avoid
ectrical shock, do not immerse the
her liquid.

INSTALLATION INSTRUCTIONS

children aged from 8 years and
Name of components
ed physical, sensory or mental
ed by manufacturer
on in order to avoid
ce and knowledge if they have
o not immerse the ZOSTAVENIE
uction concerning use of the
om 8 years and
derstand the hazards involved.
ory or mental
ZOSTAVENIE PODSTAVCA A MOTORA
e if they have
appliance. Cleaning and user
g use of the
zards involved.
Všetky 4 časti krížového podstavca namontujte k základni. Uistite sa, že sú vložené správne a
Support Installation
e by children without supervision.
ning and user
hout supervision. Align the Column Pipe with
dostatočne pevne.
holes on the support and
that they do not
rvised to ensure that they do not
tighten screws.
Na takto zostavený kríž nasaďte teleskopickú trubicu a zospodu ju zaistite skrutkou.
eaning, unplug the
uard shall not be
se and before cleaning, unplug the
hould not be
out the EU. To
man health from
the rotor blade guard shall not be
Considerate Hint:
Remove ①②parts from the
bly to promote the
component before performing
urn your used
installation.
tems or contact
They can take this
roduct
at this product should not be
grille when fan is
wastes throughout the EU. To
52
verturning.
d.
nvironment or human health from
DO8141
1
2
3
4
5
Motor shaft
Motor
Install by
aligning
① ①
Rear grill
2 2
INSTALLATION INSTRUCTIONS
Name of components
Front and Rear Guard Installation
1. Align Screw Holes on the outer ring
of both the Front and Rear Guards,
with the Positioning Clip aligned as
illustrated.
Support Installation
Align the Column Pipe with
holes on the support and
tighten screws.
Blade
Pull the blade to rotate after installing,
so as to ensure that the blade can be
normally rotated.
Lock nut of grill
Screw the lock nut of grill clockwise,
and in the meantime, fix the rear grill.
Considerate Hint:
Remove ①②parts from the
6
7
8
9
2. Press down all the Buckles to fasten the
Front Guard with the Rear Guard. At the
Screw Holes, tighten the separated screw
and nut.
Motor
Screw
Buckle
Front grill
Lock nut of blade
Lock nut of blade
anticlockwise,
and then install the
front fan cover.
3
IN
In
① ①