Boss WAZA-AIR Using Manual page 7

*2 To reset the sound position to its default state, press
the WAZA-AIR unit's up/down buttons simultaneously.
The sound position is also reset to its default state when
you change the POSITION's TYPE setting and when you
switch patches.
Parameter
GUITAR POSITION
*3
AUDIO POSITION
*3 Position can be adjusted when TYPE is SURROUND.
MEMO
5 If you move your head in any direction other than
horizontal rotation (such as moving your head
up and down), the position of the sound might
drift. If this occurs, press the WAZA-AIR unit's up/
down buttons simultaneously to reset the sound
position to its default state.
5 Do not move the WAZA-AIR unit immediately
(approximately one second) after turning on its
power. Observing this will improve the accuracy
of the gyro sensor built into the WAZA-AIR unit,
making it less likely that the position will drift.
5 With the factory settings, the following patches
are selected to POSITION TYPE.
Patch
CH 1, CH 2
CH 3, CH 4
CH 5, CH 6
Value
0–359
0–359
POSITION TYPE
SURROUND
STATIC
STAGE
Explanation
Indicates the position of
the guitar sound that's
connected wirelessly.
Indicates the position
of the Bluetooth audio
sound.
7